Security · Guide
How to Whitelist IP in Sucuri (Step by Step)

Short answer
Log in to the Sucuri dashboard, open the Website Firewall settings for your site, go to Access Control and add the IP address to the allowlist. Save the change, clear the firewall cache and test again from that address.
Key takeaways
- Sucuri now calls whitelisting an allowlist.
- Copy the IP shown on the Sucuri block page.
- Add IPs under Settings, Access Control in the firewall dashboard.
- The WordPress plugin can manage the allowlist with an API key.
- Prefer path exceptions for third-party services.
How do you whitelist an IP in Sucuri?
Log in to the Sucuri dashboard, open the Website Firewall settings for your site, go to Access Control, enter the IP address in the allowlist field, save it, and clear the firewall cache.
Sucuri now calls this an allowlist rather than a whitelist. Both terms mean the same thing: requests from that IP skip many of the firewall's blocking rules.
You usually allowlist an IP when the firewall blocks you, your team, an office network, or a trusted service such as a payment gateway or monitoring tool.
If you are not sure what the firewall does, read what Sucuri Security does first.
When should you allowlist an IP?
Allowlist an IP when a trusted person or service is blocked by mistake, or when you restrict the admin area to approved addresses and need to add someone to the approved list.
Good reasons include:
- You keep seeing the Sucuri Access Denied page while editing your own site.
- Your office or VPN uses a fixed IP and needs full admin access.
- A payment, uptime or API service sends requests that the firewall flags.
- You enabled admin area restrictions and need to approve a team member.
Avoid allowlisting unknown or shared IPs. An allowlisted address gets more trust than normal visitors, so only add ones you control or fully trust.
How do you find the IP address to allowlist?
Find the IP on the Sucuri block page, in the firewall's access logs, or by searching what is my IP from the blocked device, then copy it exactly.
The Sucuri block page normally shows the visitor IP, the Block ID and the reason. That is the most reliable source, because it is the address Sucuri actually saw.
Watch for these traps:
- Home and mobile connections often change IP addresses over time.
- VPNs and proxies show the VPN's IP, not your device's.
- Many networks use IPv6. Allowlist the IPv6 address if that is what Sucuri shows.
Our guide on Sucuri errors explains how to read the block page details.
How do you allowlist an IP in the Sucuri dashboard?
In the Sucuri firewall dashboard, select your site, open Settings, choose Access Control, add the IP under the allowlist section, and save the change.
Step by step:
- Log in to your Sucuri account.
- Open the Website Firewall dashboard and select the site.
- Click Settings.
- Open Access Control.
- Find the section for allowlisted IP addresses.
- Enter the IP address and click the add or allow button.
- Clear the firewall cache and try again from that IP.
Menu labels can change as Sucuri updates its dashboard. If the wording differs, look for Allowlist IP or Allow IP Address inside the access settings.
The dashboard also shows a list of current allowlisted IPs. Remove old entries there when someone leaves or a service changes address.
Add a short note or label for each entry if the dashboard allows it, such as office router or uptime monitor. Months later, those labels make it much easier to tell which addresses are still needed.
If you manage several sites in one Sucuri account, remember that each site has its own firewall settings. Allowlisting an IP on one site does not carry over to the others.
How do you allowlist an IP from the WordPress plugin?
If you connected the Sucuri Security plugin to your firewall with an API key, open the plugin's Firewall page and use its IP access section to add the address to the allowlist.
Steps:
- Install and activate Sucuri Security if it is not already active.
- Go to Sucuri Security > Firewall (WAF).
- Enter your firewall API key if prompted. You find it in the Sucuri dashboard under the API section.
- Open the IP access settings.
- Enter the IP and add it to the allowlist.
This method talks to the same firewall settings as the dashboard. It is handy when you are already logged in to WordPress.
If you are blocked from WordPress itself, use the Sucuri dashboard instead.
How do you allowlist an IP on GoDaddy Website Security?
GoDaddy Website Security uses Sucuri's firewall, so you allowlist IPs from the firewall settings in your GoDaddy security dashboard rather than a separate Sucuri login.
The process follows the same idea: open the firewall settings for your site, find the access control area, and add the IP to the allowed list.
GoDaddy's help article on allowing or blocking website access shows where these settings sit in its dashboard.
What are the different allowlist options?
Sucuri lets you allowlist individual IPs, and also offers related controls such as allowlisted URL paths and restricted admin areas, so you can create narrow exceptions instead of trusting a whole IP.
| Option | What it does | Use it when |
|---|---|---|
| Allowlist IP | Trusts requests from one IP | You or a service are blocked |
| Allowlist URL path | Skips rules for one path | A specific form, API or webhook is blocked |
| Restricted admin area | Only listed IPs can reach admin | You want tighter admin security |
| Blocklist IP | Blocks one IP completely | An attacker or spammer keeps hitting you |
| Country controls | Allows or blocks by country | You serve a limited region |
A path allowlist is often safer than an IP allowlist for third-party services. It keeps the rest of your site fully protected.
For example, a payment gateway might send order updates to a single webhook URL. Allowlisting that path lets the notifications through while every other part of the site keeps normal filtering.
Restricted admin areas work the other way around. Instead of trusting one address more, they block everyone except the listed IPs from reaching the login and dashboard pages.
Can you allowlist an IP range?
Some firewall setups accept ranges in CIDR notation, such as 203.0.113.0/24, but check Sucuri's current documentation or support before relying on ranges, and keep any range as small as possible.
CIDR notation describes a block of addresses. The CIDR specification explains how the number after the slash sets the range size.
Large ranges can include addresses you do not control. If a provider publishes many IPs, a path-based allowlist is usually tighter.
Why are you still blocked after allowlisting?
You may still be blocked because the firewall cache has not cleared, your IP changed, you allowlisted IPv4 but connect over IPv6, or a separate security plugin or server firewall is doing the blocking.
Check these points:
- Clear the Sucuri firewall cache and your browser cache.
- Compare the IP on the new block page with the one you added.
- Look at whether the block page is from Sucuri or another tool such as Wordfence, your host or Cloudflare.
- Wait a few minutes for the change to apply across Sucuri's network.
If the error comes from another tool, fix it there. For example, see fixing Wordfence blocking admin.
Sucuri's firewall troubleshooting guide covers other block types.
What about allowlisting Sucuri on your server?
That is a different task: if your host or server firewall blocks Sucuri's own IP addresses, your site shows connection errors, so you allowlist Sucuri's ranges at the server level, not in Sucuri.
When all traffic passes through Sucuri, your server sees Sucuri's addresses instead of visitors'. Some server firewalls treat that volume as an attack.
Ask your host to allowlist Sucuri's published IP ranges. This often fixes 502 and 504 gateway errors.
How do you keep the allowlist safe?
Keep the allowlist short, label who each IP belongs to, remove addresses you no longer need, and prefer path-based exceptions for third-party services.
Review the list every few months. Former staff, old offices and retired services should not keep trusted access.
If you work from changing IPs, avoid adding each new one forever. Use a VPN with a fixed IP, or rely on strong passwords and two-factor login instead.
To remove the firewall entirely, see how to remove the Sucuri Website Firewall.
If you are deciding whether to keep it, read is Sucuri Security worth it.
Frequently asked questions
What is the difference between whitelist and allowlist in Sucuri?
There is no difference in function. Sucuri and many other security vendors now use the term allowlist instead of whitelist. Both describe a list of trusted IP addresses or paths that the firewall lets through without applying its normal blocking rules.
Why am I blocked by Sucuri on my own website?
Your IP may have triggered a firewall rule, failed several logins, or tried to reach an admin area restricted to approved IPs. Copy the IP and Block ID from the block page, then add the IP to the allowlist in your Sucuri firewall settings.
Does allowlisting an IP turn off all Sucuri protection?
It reduces filtering for that IP, so the address gets more trust than normal visitors. Other visitors stay fully protected. Only allowlist addresses you control or fully trust, and remove them when they are no longer needed.
How long does a Sucuri allowlist change take to work?
Changes usually apply within a few minutes. Clear the firewall cache and your browser cache, then try again. If you are still blocked, check whether your IP has changed or whether another security tool is causing the block.
Can I allowlist a dynamic IP address in Sucuri?
You can, but it will stop working when your IP changes. For changing IPs, a VPN with a fixed address works better. Otherwise, update the allowlist when your address changes and remove old entries so the list stays clean.
Sources
- Sucuri Firewall Troubleshooting Guide Sucuri Docs
- Sucuri Security WordPress.org Plugin Directory
- Allow or block website access GoDaddy Help
- RFC 4632: Classless Inter-domain Routing IETF
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
Related guides
About the editors
Researched from the primary sources listed above and checked against our editorial rules before publishing.


