Security · Guide
How to Remove Sucuri Website Firewall (Step by Step)

Short answer
Removing the Sucuri Website Firewall is mainly a DNS change. Make sure your host has SSL ready, point your A record or CNAME back to your hosting IP, remove any rules that only allow Sucuri traffic, wait for DNS to update, then cancel the plan.
Key takeaways
- The firewall works through DNS, so removal is a DNS change.
- Confirm SSL at your host before switching DNS.
- Note your hosting IP and current DNS records first.
- Remove origin rules that only allow Sucuri IPs.
- Cancel the plan only after DNS has fully switched.
- Replace Sucuri with another protection layer.
How do you remove the Sucuri Website Firewall?
To remove the Sucuri Website Firewall, point your domain's DNS back to your hosting server's IP, make sure your host has a valid SSL certificate, remove any origin rules that only allow Sucuri, and then cancel the firewall plan.
The Sucuri firewall sits in front of your site. Visitors connect to Sucuri first, and Sucuri passes clean traffic on to your host.
Because of that setup, removing it is mostly a DNS task, not a WordPress task. Deleting the Sucuri plugin alone does not take the firewall away.
This guide walks through each step in a safe order so your site stays online during the switch. If you only want to understand the service first, see our explainer on what Sucuri Security does.
How does the Sucuri firewall connect to your site?
The firewall works by changing your domain's DNS so it points to Sucuri's servers, which then forward requests to your real hosting IP, called the origin.
When you activated the firewall, you or your host changed an A record, a CNAME, or occasionally your nameservers. Sucuri's firewall configuration documentation describes these setups and how the hosting IP is stored.
To remove the firewall, you reverse that change. Traffic then goes straight to your host again.
| Part of the setup | What it does | What to change when removing |
|---|---|---|
| DNS A record or CNAME | Sends visitors to Sucuri | Point it back to the host |
| Hosting IP in Sucuri | Tells Sucuri where your site lives | Note it before cancelling |
| SSL at Sucuri | Encrypts visitor traffic at the edge | Make sure the host has SSL |
| Origin lock rules | Only allow Sucuri IPs at the host | Remove them |
| Sucuri plugin | Scanner and firewall API key | Keep or remove, optional |
Keep this table handy as a checklist while you work.
What should you do before removing the firewall?
Take a full backup, note your current DNS records, find your hosting IP address, and plan another way to protect the site once Sucuri is gone.
Preparation avoids downtime. Do these first:
- Back up the site: files and database. Our guide on how to back up a WordPress site covers the options.
- Screenshot your DNS zone: record every A, CNAME, MX and TXT entry.
- Find your hosting IP: check your hosting control panel, or the hosting IP shown in the Sucuri firewall dashboard settings.
- Plan replacement security: a host firewall, Cloudflare, or a security plugin.
If you are moving hosts at the same time, use the new host's IP. Sucuri also has guidance on changing the hosting IP if you stay with the firewall.
Does your host have an SSL certificate ready?
Before switching DNS, confirm your host has a valid SSL certificate for your domain, because Sucuri may have been handling HTTPS for visitors and your origin might not have its own certificate.
If the host has no certificate, visitors see security warnings as soon as DNS points back to it.
Most hosts offer free Let's Encrypt certificates. Some issue them automatically once DNS points to their server, which can mean a short gap.
To reduce that gap, check with your host whether they can issue the certificate before the DNS change. Some hosts support DNS-based validation for this.
The Let's Encrypt documentation explains how certificate validation works if you want the details.
How do you change your DNS back to your host?
Log in to wherever your DNS is managed, change the A record or CNAME that points to Sucuri so it points to your hosting IP, and save the change.
Your DNS might be at your domain registrar, your host, or a service like Cloudflare. Change it where the active records live.
Steps:
- Open your DNS zone editor.
- Find the A record for the root domain that points to the Sucuri firewall IP.
- Replace the value with your hosting IP.
- Do the same for the www record, which may be a CNAME or a second A record.
- Leave MX, TXT and other records unchanged unless Sucuri asked you to edit them.
- Save the changes.
If you moved your nameservers to Sucuri at setup, which is less common, switch the nameservers back to your registrar or host and make sure all records exist there first.
Cloudflare's explainer on DNS A records is a useful refresher if record types are unfamiliar. Our guide to WordPress DNS settings covers the common setups.
How long does the DNS change take?
DNS changes usually take effect within minutes to a few hours, though old records can be cached for up to a day or two depending on the TTL value.
During this time, some visitors reach your host directly while others still go through Sucuri. That is why you should not cancel the firewall plan straight away.
Lowering the TTL on the records a day before the switch can shorten the overlap. Our guide on how long DNS propagation takes explains TTL in plain terms.
You can check progress with public DNS lookup tools that query servers around the world. When they all show your hosting IP, the switch is complete.
How do you remove origin lock rules at your host?
If you restricted your host to only accept traffic from Sucuri's IP ranges, remove those rules, or direct visitors will be blocked once DNS points to your host.
Some setups add rules in htaccess, the server firewall, or the hosting panel so attackers cannot bypass Sucuri by hitting the hosting IP directly.
Look for:
- htaccess lines that allow only certain IP ranges and deny all others.
- Server firewall or security group rules limited to Sucuri IPs.
- Hosting panel settings for IP allowlists.
Remove these before or right after the DNS change. Test the site from a mobile network to confirm visitors are not blocked.
If FTP, email, or cPanel access changed when you added the firewall, Sucuri's troubleshooting page for FTP, mail and cPanel explains which hostnames to use, which helps when undoing that setup.
What about the Sucuri plugin in WordPress?
The Sucuri Security plugin is separate from the paid firewall, so you can keep it for free scanning and hardening, or remove it if you no longer want it.
If you entered a firewall API key in the plugin, clear it from the plugin's firewall settings so it stops trying to talk to a service you no longer have.
To remove the plugin completely:
- Go to Plugins in WordPress.
- Deactivate Sucuri Security.
- Delete it.
Hardening options applied by the plugin, such as blocking PHP in uploads, may have added htaccess rules. Check the plugin's settings and revert hardening before deleting it if you want a clean removal.
How do you cancel the Sucuri plan?
Cancel your Sucuri subscription only after DNS has fully switched and the site works correctly through your host, so you are never left without a working path for visitors.
Log in to your Sucuri account and use the billing or subscription section to cancel. If you cannot find the option, contact Sucuri support from the dashboard.
Check whether your plan includes malware cleanup or monitoring you still want. Cancelling usually ends those services too.
If Sucuri came bundled with your hosting, such as through a host's security add-on, cancel through the host instead.
How do you check the site works after removal?
Load the site in a private window over HTTPS, check the response headers no longer mention Sucuri, test forms and logins, and watch error logs for the next day.
Checks to run:
- Visit the home page and a few inner pages over HTTPS.
- Confirm there is no certificate warning.
- Look at response headers for any Sucuri server or cache headers.
- Log in to wp-admin.
- Submit a contact form and complete a test checkout if you run a shop.
If you see too many redirects, a CDN or SSL setting is likely clashing. Our guide to fixing a Cloudflare redirect loop covers similar symptoms.
How do you protect the site without Sucuri?
Replace the firewall with another layer, such as Cloudflare, a host-level firewall, or a security plugin, so you do not leave the site unprotected.
Options include:
- Cloudflare: free plan with DNS, CDN and basic protection. See our guide on how to set up Cloudflare for WordPress.
- Host firewall: many managed hosts include one.
- Security plugin: an application firewall that runs inside WordPress.
Our explainer on what a web application firewall is compares cloud and plugin firewalls.
Keep WordPress, themes and plugins updated, use strong passwords and two-factor login, and keep regular off-site backups. Those basics matter more than any single product.
Frequently asked questions
Does deleting the Sucuri plugin remove the firewall?
No. The plugin and the firewall are separate. The firewall works through your DNS records, so you must point DNS back to your host to remove it. The plugin only provides scanning, hardening and a link to the firewall settings.
Will my site go down when I remove Sucuri?
It should not if you prepare first. Make sure your host has a valid SSL certificate, remove any origin lock rules, then change DNS. Keep the Sucuri plan active until DNS has fully switched so visitors on old records are still served.
Where do I find my hosting IP address?
Check your hosting control panel, usually on the account or server information page. The Sucuri firewall dashboard also stores the hosting IP in its settings. Ask your host if you are not sure which address to use.
How long should I wait before cancelling Sucuri?
Wait until public DNS lookup tools show your hosting IP everywhere and the site works correctly over HTTPS. That usually takes a few hours, but allowing a day or two is safer if your records had a long TTL.
What should I use instead of the Sucuri firewall?
Common choices are Cloudflare, a firewall provided by your host, or a WordPress security plugin with an application firewall. Combine any of them with updates, strong passwords, two-factor login and regular off-site backups.
Sources
- Website firewall configuration Sucuri Docs
- FTP, SFTP, SSH, mail, cPanel or WebSockets not working Sucuri Docs
- What is a DNS A record? Cloudflare
- Let's Encrypt documentation Let's Encrypt
- Sucuri Security plugin WordPress.org
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
Related guides
About the editors
Researched from the primary sources listed above and checked against our editorial rules before publishing.


