Plugin how-tos · Guide
How to Undo in Beaver Builder (Step by Step)

Short answer
Press Ctrl+Z on Windows or Cmd+Z on Mac inside the Beaver Builder editor to undo, and add Shift to redo. Open History from the Tools menu to jump back several steps, use Discard under Done to drop all unpublished edits, or restore older layouts from Revisions.
Key takeaways
- Undo and redo arrived in Beaver Builder 2.4.
- Click the canvas before using keyboard shortcuts.
- The History panel jumps back several steps.
- Cancel reverts changes in an open settings window.
- Discard drops every unpublished change at once.
- Revisions restore older published layouts.
How do you undo in Beaver Builder?
Press Ctrl+Z on Windows or Cmd+Z on Mac inside the Beaver Builder editor to undo your last change, and Ctrl+Shift+Z or Cmd+Shift+Z to redo it; the History panel lets you jump back several steps.
Beaver Builder added undo, redo and a change history in version 2.4. Older versions had no undo, which is why some older tutorials say it is not possible.
Undo is only one of several ways to reverse changes. Depending on how far back you need to go, you might use the History panel, discard unpublished changes, or restore a saved revision.
If you are new to the builder, our guide on how to use Beaver Builder in WordPress covers the editor basics first.
Which undo option should you use?
Use keyboard undo for the last few actions, the History panel to jump further back in the current session, Discard to throw away all unpublished edits, and Revisions to restore an older published version.
This table compares the options.
| Option | How to open it | How far back | Best for |
|---|---|---|---|
| Keyboard undo and redo | Ctrl or Cmd+Z, add Shift to redo | Recent actions | Quick mistakes |
| History panel | Tools menu in the editor | Current session steps | Jumping back several changes |
| Discard changes | Done button | Back to last publish | Abandoning a whole session |
| Revisions | Tools menu in the editor | Previous saved versions | Restoring an older layout |
| Site backup | Backup plugin or host | Any backup date | Major mistakes or lost pages |
Beaver Builder's own undo and redo documentation describes the shortcuts and history behaviour.
How do you use the undo keyboard shortcut?
Click anywhere on the page canvas so the editor has focus, then press Ctrl+Z on Windows or Cmd+Z on Mac; each press reverses one more change.
Follow these steps:
- Make sure the Beaver Builder editor is open on the page.
- Close any open settings window, or click outside it.
- Press Ctrl+Z or Cmd+Z once to undo the last change.
- Press it again to step further back.
- Press Ctrl+Shift+Z or Cmd+Shift+Z to redo a change you undid.
If focus is inside a text field, the browser may undo typing in that field rather than a builder action. Click on the page canvas first.
Beaver Builder lists every shortcut on its keyboard shortcuts page.
How do you use the History panel?
Open the Tools menu in the Beaver Builder top bar and choose History to see a list of recent actions, then click any step to return the layout to that point.
The History list records actions such as adding, moving, editing and deleting rows, columns and modules.
Clicking an earlier step resets the layout to how it looked at that moment. Later steps stay in the list until you make a new change, so you can move forward again if you went too far.
This is safer than pressing undo many times in a row, because you can see each step's name before you click it. Names usually describe the action, such as a module being added or a row being moved.
The Tools menu documentation shows where History and the other tools sit in the editor.
How do you undo changes inside a module settings window?
While a module's settings window is open, click Cancel to drop changes made in that window, or close it and use undo after saving the settings.
Settings windows preview changes live on the page. Clicking Cancel reverts everything changed since you opened the window.
If you already clicked Save on the settings window, use the main undo shortcut or the History panel instead.
This is handy when you experiment with colours, spacing or typography. Open, try, and cancel if you do not like the result.
How do you discard all unpublished changes?
Click Done in the top bar and choose Discard to throw away every change since the page was last published or saved, returning to the previous version.
Beaver Builder keeps your edits as a draft layout until you publish. The live page does not change while you work.
Clicking Done shows options such as Publish, Save Draft and Discard. Choose Discard and confirm.
Use this when a whole editing session has gone wrong. It is faster than undoing dozens of steps.
It also helps when several people edit the same site. If someone left a page half-finished in draft, discarding returns it to the last published version without touching the live page.
Be careful: discarded changes cannot be recovered with undo afterwards.
How do you restore a Beaver Builder revision?
Open the Tools menu, choose Revisions, and pick an earlier saved version of the layout from the list to preview and restore it.
Beaver Builder uses WordPress revisions to store layout versions each time you publish. That lets you go back further than the current session's history.
Steps:
- Open the page in Beaver Builder.
- Open the Tools menu and select Revisions.
- Click a revision to preview it on the canvas.
- Restore the one you want, then publish.
If no revisions appear, your site may limit or disable them. The WordPress revisions documentation explains how revisions are stored and limited.
Our guide on how to see revisions in WordPress covers revision settings in more depth.
Why is undo not working in Beaver Builder?
Undo usually fails because you run a version older than 2.4, focus is inside a text field, the history was disabled for performance, or a plugin conflict breaks the editor's scripts.
Check these points in order:
- Update Beaver Builder to the latest version.
- Click on the canvas before pressing the shortcut.
- Check whether a developer has reduced or disabled undo history.
- Look for JavaScript errors in the browser console.
- Test with other plugins deactivated.
Very large layouts can make the history heavy. Beaver Builder documents how to reduce or disable undo and redo for performance, so check whether that change was made on your site.
If the whole editor misbehaves, see our guide on Beaver Builder not working.
Clearing the builder's cache can also help, as shown in our guide on how to clear Beaver Builder cache.
How can you avoid needing undo in the first place?
Duplicate a row before big edits, save drafts often, and save layouts you like as templates, so you always have a known good version to return to.
A few habits make mistakes cheaper:
- Duplicate a row or module, edit the copy, and delete the original only when you are happy.
- Use Save Draft at milestones so you have a checkpoint between publishes.
- Save rows or modules you reuse as saved templates, if your version supports it.
- Work on a staging site for redesigns of important pages.
Duplicating is especially useful for experiments. You can compare both versions side by side on the canvas before choosing one.
Our guide on Beaver Builder global settings also explains site-wide defaults, which can save you from repeating and undoing the same style changes on every page.
Is undo available in Beaver Builder Lite?
Yes, undo, redo and history are part of the core editor, so they are available in the free Beaver Builder Lite plugin as well as the premium versions, as long as you run version 2.4 or newer.
Premium versions add more modules, templates and features, but the basic editing tools are shared.
You can check your version on the Plugins screen. The Beaver Builder Lite plugin page lists the current release.
What if you need to undo something after leaving the editor?
Once you publish and leave, session undo history is gone, so use Revisions inside Beaver Builder or restore a site backup for older or larger mistakes.
Revisions handle most cases, such as a deleted section or a bad redesign.
For deleted pages, check Pages > Trash first. Trashed pages can be restored with one click for a set period.
For site-wide problems, restore from a backup. Our guide on how to restore a backup with UpdraftPlus explains the process.
For undo in the WordPress block editor, see our guide on how to undo in WordPress.
Frequently asked questions
What is the undo shortcut in Beaver Builder?
Press Ctrl+Z on Windows or Cmd+Z on Mac to undo, and Ctrl+Shift+Z or Cmd+Shift+Z to redo. Click on the page canvas first so the shortcut reaches the builder rather than a text field.
Where is the History panel in Beaver Builder?
Open the Tools menu in the editor's top bar and choose History. It lists recent actions in the current editing session, and clicking an earlier step returns the layout to that point.
Can I undo after publishing in Beaver Builder?
Session undo history does not carry over after you publish and leave the editor. Open Revisions from the Tools menu to restore an earlier published version, or restore a site backup for bigger mistakes.
How do I cancel all my changes in Beaver Builder?
Click Done in the top bar and choose Discard. This removes every change since the last publish or saved draft. Discarded changes cannot be brought back with undo, so use it only when you want to abandon the whole session.
Why doesn't Ctrl+Z work in Beaver Builder?
You may be on a version older than 2.4, focus may be inside a text field, the history feature may have been disabled for performance, or a script conflict may break the editor. Update the plugin and test with other plugins off.
Sources
- Undo and redo Beaver Builder Docs
- The Tools Menu Beaver Builder Docs
- Reduce or disable the undo/redo capability Beaver Builder Docs
- Beaver Builder keyboard shortcuts Beaver Builder
- Revisions WordPress.org Documentation
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
Related guides
About the editors
Researched from the primary sources listed above and checked against our editorial rules before publishing.


