Plugins Plugin hub Backup SEO Caching Security Forms WooCommerce Images Best backup plugins
Hosting Hosting directory Shared hosting Managed WordPress Cloud hosting VPS hosting By reader location Hosting finder
Themes & builders Compare Rank Math vs Yoast
Tools All tools Hosting finder Plugin stack builder Cost calculator Salt generator Theme detector Who is hosting this? Speed test Headline analyzer robots.txt generator Redirect generator Uptime calculator Blog name generator
Blog Best backup plugins Deals
Guides All guides Speed up WordPress Choose hosting Back up WordPress
How we test

Blogging & content · Guide

How to Change Slider Image in WordPress (Step by Step)

How to Change Slider Image in WordPress (Step by Step)

Short answer

To change a slider image in WordPress, first find out whether a plugin, your page builder or your theme created the slider. Open that slider's editor, select the slide and replace its background or image layer from the Media Library. Save, then clear your caching plugin and browser cache so the new image shows.

Key takeaways

  • Find out whether a plugin, builder or theme owns the slider.
  • Most sliders store the main picture as the slide background.
  • Match the slider's width and shape to avoid stretching or cropping.
  • Clear plugin, host, CDN and browser caches after the change.
  • Check the slide on phones, since narrow screens crop wide images.

How do you change a slider image in WordPress?

Find out which tool built the slider, open that slider's editor, select the slide, replace its background or image from the Media Library, then save and clear your cache.

Most WordPress sliders come from one of three places: a slider plugin, your page builder, or your theme's own settings. Each keeps its slides in a different spot.

The good news is that the steps after that are almost the same everywhere. You pick the slide, swap the image, check the crop and save.

The sections below cover the common setups. Start by working out which one your site uses.

How do you find out what created your slider?

Check the page in the editor: a slider plugin usually shows as a shortcode or its own block, a page builder shows it as a widget, and theme sliders are set under Appearance.

Open the page in Pages > All Pages and click Edit. Look at the slider area.

  • Shortcode or plugin block: Text like [smartslider3 slider="2"] or a block named after a slider plugin means a plugin owns it.
  • Page builder widget: In Elementor, Divi or similar builders, the slider is a widget you click to edit.
  • Nothing visible in the editor: The slider likely comes from the theme. Check Appearance > Customize or a theme options menu.

You can also look at Plugins > Installed Plugins for names such as Smart Slider 3, Slider Revolution or MetaSlider. If you did not build the site yourself, our guide to finding which theme a site uses helps you identify theme features.

Slider sourceWhere to edit itWhat to change
Smart Slider 3Smart Slider menu in the adminSlide background image or image layer
Slider RevolutionSlider Revolution menu, then the slide editorSlide background or image layer
MetaSliderMetaSlider menu, then the slideshowSlide image via the change image option
Elementor Slides widgetEdit page with Elementor, click the widgetBackground image for each slide
Theme sliderAppearance > Customize or theme optionsSlide image field in the theme panel
Cover or Gallery blockBlock editor on the pageReplace option in the block toolbar

How do you change a slide image in Smart Slider 3?

Open the Smart Slider menu in your dashboard, pick the slider, click the slide you want, then replace its background image or image layer and save the slide.

Smart Slider separates the slide background from layers placed on top. Most hero sliders use the background, so check the slide settings first.

Click the current background image to open the Media Library. Upload a new file or choose one you already have, then confirm.

If the old picture is an image layer instead, click that layer on the canvas and change it in the layer settings panel. Our Smart Slider guide covers layers, slide order and responsive settings in more detail.

The free version is listed in the WordPress plugin directory, along with links to the developer's documentation.

How do you change a slide image in Slider Revolution?

Open Slider Revolution from the admin menu, open the module, choose the slide, then change the slide background image or the image layer and save.

Slider Revolution uses a visual editor with a timeline. The slide background is set in the slide options, while pictures placed on top are separate layers.

Select the background, pick Image as the source if it is not already set, and choose your new file from the Media Library.

Check every device view after the change. Slider Revolution lets you set different sizes and positions for desktop, tablet and phone, so one view can look right while another crops badly. Our Slider Revolution guide explains the editor layout.

If the preview misbehaves after your edit, see our fix for Slider Revolution preview not working.

How do you change images in MetaSlider or a theme slider?

In MetaSlider, open the slideshow, hover over the slide and use the option to change its image; in a theme slider, open the Customizer or theme options and replace the image field.

MetaSlider shows every slide in a list. You can add new slides, delete old ones, and drag them into a new order.

Theme sliders vary more. Many themes put them under Appearance > Customize, inside a section named something like Homepage, Hero or Slider.

The Customizer documentation explains how live preview works, so you can see the new image before publishing.

Some premium themes have a separate options page. If you cannot find it, check the theme's own documentation or support forum, since menu names differ between themes.

How do you change a slider image in Elementor?

Open the page with Elementor, click the slider widget, choose the slide in the widget's content panel, open its background settings and pick a new image, then click Update.

The Slides widget in Elementor Pro stores each slide as an item in a list. Expand the slide you want to change.

Under the slide's background tab, click the current image to open the Media Library and select a replacement.

Third-party add-ons add their own carousel widgets, and the image field may sit under content rather than background. The idea is the same. Our Elementor Pro slider settings guide covers height, transitions and navigation.

What size should a slider image be?

Use an image at least as wide as the slider displays on large screens, with the same aspect ratio as the slider, so it fills the space without stretching or awkward cropping.

Many full-width sliders show at around 1920 pixels wide on big monitors. A smaller image gets stretched and looks soft.

Match the shape too. If the slider is 1920 by 800, a square photo will be cropped heavily at the top and bottom.

Keep file sizes down. A slider sits at the top of the page, so its first image often decides how fast the page appears to load. Google's guide to Largest Contentful Paint explains why that top image matters.

Compress images before uploading and use modern formats where your slider supports them. Our guide on sizing images properly goes into dimensions and crops.

For compression tools and formats, see our guide to optimizing images.

Why does my new slider image look cropped?

The slider shows the image at a fixed height and covers the area, so any part that does not match the slider's shape gets cut off.

Most slider tools let you set a focus point or background position. Move it to keep faces or text in view.

Also check the mobile view. Phones show a narrow, tall area, so wide banners often lose their sides there.

Why is the old slider image still showing?

The old image usually comes from a cache, either your caching plugin, your host's server cache, a CDN, or your browser; clear them and the new image appears.

Clear caches in this order:

  1. Your browser, or open the page in a private window.
  2. Your caching plugin, such as LiteSpeed Cache, WP Rocket or W3 Total Cache.
  3. Your host's cache from the hosting panel.
  4. Your CDN, such as Cloudflare, if you use one.

If you use LiteSpeed, our guide on purging LiteSpeed Cache covers the exact buttons.

Some slider plugins also generate their own cached files or optimized versions of images. Look for a clear cache or regenerate option inside the slider plugin's settings.

If the image is still wrong, you may have edited a different slider. Sites sometimes have an old copy with a similar name, so confirm the shortcode ID or block points to the slider you changed.

Can you replace the image file without editing the slider?

Yes, a media replace plugin can swap the file behind an existing image so every place that uses it updates, but it is often easier to change the slide directly.

Replacing the file keeps the same attachment and URL. This is useful when one image appears in many places.

There are trade-offs. Caches and CDNs may hold the old file at the same address for a while, and resized copies may need to be regenerated.

Our guide on whether you can replace a media file in WordPress explains the options and their limits.

What should you check after changing a slider image?

Check the slider on desktop, tablet and phone, confirm the text on top is still readable, add useful alt text, and test the page speed.

A short checklist helps:

  • Readability: Light text on a light photo becomes unreadable. Add an overlay or pick a darker image.
  • Alt text: Describe the image for screen readers, or leave it empty if the image is purely decorative.
  • Links and buttons: Make sure buttons on the slide still point to the right pages.
  • Speed: Large slider images slow down the first view. Compare results before and after in a speed tool.
  • Responsive images: WordPress creates several sizes on upload, as described in the add_image_size reference, so browsers can load smaller files on phones.

MDN's guide to responsive images explains how browsers choose between those sizes. Some sliders use their own sizing instead, which is worth checking in the plugin settings.

Frequently asked questions

Where are slider settings in WordPress?

It depends on what built the slider. Slider plugins add their own admin menu, page builders keep sliders inside the page editor as a widget, and theme sliders usually sit under Appearance > Customize or a theme options page.

How do I change the slider on my WordPress homepage?

Edit the homepage and look at how the slider is added. If it is a shortcode or plugin block, edit it in that plugin's menu. If nothing shows in the editor, check the theme's Customizer settings for a hero or slider section.

What is the best image size for a WordPress slider?

Use an image at least as wide as the slider appears on large screens, often around 1920 pixels for full-width sliders, and match its aspect ratio. Compress the file so the first slide does not slow down the page.

Why did my slider image not update?

A cache is usually serving the old version. Clear your caching plugin, host cache, CDN and browser, and check that you edited the same slider that appears on the page.

Can I change slider images without a plugin?

If the slider comes from your theme or is built with a core block such as Cover or Gallery, yes. Edit the theme settings or the block directly and replace the image from the Media Library.

Sources

  1. Smart Slider 3 WordPress.org Plugin Directory
  2. MetaSlider WordPress.org Plugin Directory
  3. Customizer screen WordPress.org Documentation
  4. Largest Contentful Paint (LCP) web.dev
  5. Responsive images MDN Web Docs

Is your product missing, or something out of date?

Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.

About the editors

Written and checked byWPLegible Editorial Team Independent WordPress reviews and guides

Researched from the primary sources listed above and checked against our editorial rules before publishing.