Plugin how-tos · Info
Forminator SMTP Settings Explained: What Each Option Does

Short answer
Forminator controls each email's recipients, subject, message, from name and reply-to, but the SMTP connection comes from a separate mail plugin. Install one SMTP plugin, enter your mail server host, port, encryption and login, then send from an address on your own domain.
Key takeaways
- Forminator sends mail through the WordPress mail function.
- SMTP host, port and login are set in a separate SMTP plugin.
- Send from your own domain and use reply-to for the visitor.
- Match port 587 with TLS and port 465 with SSL.
- SPF, DKIM and DMARC records improve inbox delivery.
- Test SMTP first, then a real form submission.
What are Forminator SMTP settings?
Forminator SMTP settings are the mail server details that send your form emails, and they live in a separate SMTP plugin, while Forminator itself controls who gets each email, the sender name, the from address and the message.
Forminator is a free form builder from WPMU DEV. It sends notification emails through the standard WordPress mail function, which in turn uses whatever mail system your site has.
By default, that means your web server's basic mail. It often lands in spam or never arrives. SMTP replaces it with an authenticated mail service.
This guide explains both sides: the email options inside Forminator, and the SMTP options you set in a mail plugin. At the time of writing, Forminator does not ship its own SMTP connection panel, so check the Forminator plugin page in case that changes.
How does Forminator send email?
Forminator builds each notification from your form settings, then hands it to WordPress's mail function, which sends it through the server or through SMTP if a mail plugin is configured.
That chain matters when troubleshooting. Forminator decides the content and recipients. The mail plugin decides how the message travels.
The wp_mail function reference explains how WordPress sends mail and how plugins can change the sending method.
| Layer | What it controls | Where you change it |
|---|---|---|
| Forminator notification | Recipients, subject, body, from name, reply-to | Form's email notifications tab |
| WordPress mail | Passes the message on | No settings by default |
| SMTP plugin | Mail server, port, encryption, login | SMTP plugin settings |
| DNS records | Sender authentication | Your domain's DNS |
If emails fail, check each layer in this order.
Which email settings does Forminator have?
Each Forminator form has an email notifications section where you set recipients, subject, message, from name, from address, reply-to, CC and BCC, with optional conditions for who receives each email.
Open the form in Forminator and go to its email notifications tab. You can add several notifications, such as one for the site owner and one for the person who filled in the form.
Key fields:
- Recipients: who gets the email. Use a fixed address or a field value such as the visitor's email.
- Subject: the email subject. You can insert field values.
- Email body: the message, which can include all submitted fields.
- From name and from address: the sender shown in the inbox.
- Reply-to: where replies go, often the visitor's email field.
- CC and BCC: extra recipients.
Conditions let you send a notification only when certain answers are given, such as routing sales enquiries to one team and support questions to another.
What should the from address be?
Use an address on your own domain that your SMTP service is allowed to send from, not the visitor's email, because sending as someone else's address gets messages rejected.
This is the most common Forminator email mistake. Setting the from address to the visitor's email field looks convenient, but receiving mail servers see a message claiming to come from a Gmail or Outlook address, sent by your server. They often block it.
Instead:
- Set the from address to something like a noreply or forms address on your domain.
- Set the reply-to field to the visitor's email field.
- Make sure the SMTP plugin is allowed to send from that address.
Now you can still click reply and answer the visitor directly.
What are the main SMTP settings?
The core SMTP settings are the mail server host, the port, the encryption type, whether to use authentication, and the username and password for the mail account.
Every SMTP plugin uses the same basic fields, though the labels vary. Your email provider supplies the values.
| SMTP setting | What it does | Typical value |
|---|---|---|
| SMTP host | Address of the mail server | Provided by your email service |
| Port | Network port for the connection | 587 for TLS, 465 for SSL |
| Encryption | Protects the connection | TLS or SSL, never none in production |
| Authentication | Logs in to the mail server | On |
| Username | Mail account login | Usually the full email address |
| Password | Mail account password or app password | From your provider |
| From email | Default sender address | An address on your domain |
| Force from | Overrides plugin from addresses | Often on |
Port and encryption must match. Port 587 normally uses TLS, and port 465 uses SSL. A mismatch is a common reason for connection errors.
Which SMTP plugin should you use with Forminator?
Any reputable SMTP plugin works with Forminator, because it simply sends through WordPress mail, and popular options include WP Mail SMTP, FluentSMTP, Post SMTP and Branda from WPMU DEV.
Choose one plugin only. Two SMTP plugins competing over WordPress mail can cause odd failures.
WP Mail SMTP is widely used and supports many mail services through API connections as well as standard SMTP. WPMU DEV's own Branda plugin includes an SMTP module if you already use their tools.
Our explainer on what WP Mail SMTP is covers its features.
For a general setup walkthrough, follow how to set up SMTP in WordPress.
Should you use SMTP or an API mailer?
API mailers connect to services such as SendGrid, Mailgun or Brevo over HTTPS and often work where SMTP ports are blocked, while plain SMTP works with almost any email provider.
Many SMTP plugins offer both. API connections usually need an API key instead of a username and password.
Some hosts block outgoing SMTP ports to stop spam. If SMTP connections time out, an API mailer avoids the problem because it uses the normal web port.
Transactional email services also give you logs and delivery reports, which make problems easier to trace.
Which DNS records help Forminator emails arrive?
SPF, DKIM and DMARC records tell receiving servers that your mail service is allowed to send for your domain, which greatly improves inbox delivery.
Even with SMTP, emails can land in spam if your domain lacks these records. Your email provider tells you which records to add.
- SPF lists the services allowed to send for your domain.
- DKIM adds a signature that proves the message was not changed.
- DMARC tells receivers what to do when checks fail.
Our guide on setting up SPF, DKIM and DMARC for WordPress email walks through each record. Cloudflare's explainer on DMARC, DKIM and SPF gives a plain overview.
How do you test Forminator emails after setting SMTP?
Send a test email from the SMTP plugin first, then submit a real Forminator form and check both the inbox and spam folder for the notification.
Testing in two steps tells you where any problem lies:
- SMTP plugin test fails: the SMTP settings are wrong.
- SMTP test works, Forminator email fails: check the form's notification settings.
Turn on email logging in your SMTP plugin if it offers it. The log shows whether Forminator handed the email over and what the mail server replied.
Our guide on Forminator email notifications not working covers the form-side checks in depth.
What SMTP errors are most common?
The most common errors are failed authentication, connection timeouts, and rejected sender addresses, and each points to a specific setting.
- Could not authenticate: wrong username or password, or the provider needs an app password. See fixing SMTP could not authenticate.
- Connection timed out: wrong host, wrong port, or the host blocks SMTP ports.
- Sender rejected: the from address is not allowed by the mail service.
- Emails go to spam: missing SPF, DKIM or DMARC records.
Fix one error at a time and re-run the test email after each change.
What are the best practices for Forminator email?
Use SMTP or an API mailer, send from your own domain, set reply-to to the visitor's email, add SPF, DKIM and DMARC records, and test after every major change.
A few more tips:
- Keep notifications short and include the key fields at the top.
- Use conditions to route emails to the right person.
- Store submissions in Forminator so you never rely on email alone.
- Turn on email logs so you can prove delivery.
- Re-test after changing hosts, DNS or SMTP plugins.
If you have not added a form to your site yet, see how to add a Forminator form to WordPress.
Frequently asked questions
Does Forminator have built-in SMTP settings?
At the time of writing, Forminator does not include its own SMTP connection panel. It sends mail through WordPress, so you set the SMTP server, port and login in a separate mail plugin. Check the plugin page for any changes in newer versions.
Which SMTP plugin works with Forminator?
Any reputable SMTP plugin that hooks into WordPress mail works, including WP Mail SMTP, FluentSMTP, Post SMTP and Branda. Use only one SMTP plugin at a time so they do not conflict.
Why should the from address not be the visitor's email?
Mail servers check whether your server is allowed to send for the address in the from field. Sending as a visitor's Gmail or Outlook address fails those checks, so messages get blocked. Use your own domain and put the visitor's email in reply-to.
Which port should I use for Forminator SMTP?
Use the port your email provider recommends. Port 587 with TLS is the most common choice, and port 465 with SSL is also widely supported. The port and encryption setting must match, or the connection will fail.
Why do Forminator emails still go to spam with SMTP?
SMTP fixes how mail is sent, but receiving servers also check your domain's DNS records. Add SPF, DKIM and DMARC records for your mail service, send from your own domain, and avoid spammy subject lines.
Sources
- Forminator plugin WordPress.org
- wp_mail() WordPress Developer Resources
- WP Mail SMTP plugin WordPress.org
- What are DMARC, DKIM, and SPF? Cloudflare
- Forminator not sending emails WP Mail SMTP
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
Related guides
About the editors
Researched from the primary sources listed above and checked against our editorial rules before publishing.


