Troubleshooting
Elementor Pro Not Working After Update: Causes and How to Fix It

Short answer
Elementor Pro usually breaks after an update because Elementor and Elementor Pro are on mismatched versions, old CSS is cached, or the licence is disconnected. Update both plugins together, regenerate files under Elementor Tools, clear every cache, and check the licence screen.
Key takeaways
- Elementor Pro needs a compatible version of free Elementor.
- Regenerate CSS files after every major update.
- An inactive licence can block Pro updates and features.
- Outdated add-ons often break the editor after updates.
- Elementor's version control tool can roll back both plugins.
- Test major updates on staging first.
Why is Elementor Pro not working after an update?
Elementor Pro usually breaks after an update because the free Elementor plugin and Elementor Pro are on mismatched versions, old CSS files are cached, the licence is inactive, or an add-on is not yet compatible.
Elementor Pro is an add-on that depends on the free Elementor plugin. The two are updated separately, so one can easily get ahead of the other.
Symptoms include Pro widgets disappearing, headers and footers from the Theme Builder vanishing, a broken layout, an editor that will not load, or a critical error.
Work through the steps below in order. Most sites are fixed by the first two or three.
Before you start, take a backup. If the live site is badly broken, our guide on fixing an Elementor critical error covers getting the site back online first.
What are the common causes at a glance?
Most post-update problems come from a few causes, and each one has a quick check you can run in minutes.
| Symptom | Likely cause | First fix |
|---|---|---|
| Notice saying Pro needs a newer Elementor | Version mismatch | Update both plugins |
| Layout looks broken or unstyled | Old CSS files cached | Regenerate files and data |
| Pro widgets locked or missing | Licence inactive or expired | Reconnect licence |
| Header or footer missing | Theme Builder conditions or cache | Check conditions, clear cache |
| Editor will not load | Add-on or plugin conflict | Conflict test |
| Critical error | PHP error or memory limit | Check error log |
Pick the closest match and start with that section.
Are Elementor and Elementor Pro on matching versions?
Elementor Pro needs a compatible version of the free Elementor plugin, so after updating one, update the other too, and look for an admin notice about required versions.
When Pro is updated but the free plugin is not, or the other way round, Pro features may switch off. Elementor usually shows a notice in the dashboard saying which version is needed.
Steps:
- Go to Dashboard, then Updates.
- Update Elementor and Elementor Pro together.
- If Pro does not show an update, check your licence connection first.
Elementor's help article on Elementor Pro update errors covers update problems specific to Pro. The free plugin's WordPress.org page lists its current version and requirements.
Have you regenerated Elementor's CSS files?
Elementor stores generated CSS for each page, and old files often clash with new code after an update, so regenerate them from the Elementor tools screen.
Go to Elementor, then Tools, and use the option to regenerate files and data. The label has changed over time, so look for regenerate CSS or regenerate files.
Also use the option to sync the template library if your Pro templates look out of date.
Then clear every other cache:
- Your caching plugin.
- Your host's server cache.
- Your CDN, such as Cloudflare.
- Your browser, or test in a private window.
Elementor's help page on changes not appearing online explains why caches cause this. Our guide on how to clear cache with Elementor walks through the steps.
Is your Elementor Pro licence still active?
An expired or disconnected licence can stop Pro updates and, in some cases, limit Pro features, so check the licence screen and reconnect your account if needed.
Open Elementor, then License, in your dashboard. It should show your account as connected and the licence as active.
If it is disconnected, click connect and log in to your Elementor account. If the licence has expired, renew it from your Elementor account.
A site can lose its licence connection after a migration or a domain change. Our guide on how to install Elementor Pro covers connecting the licence step by step.
Did the update change Elementor features or experiments?
Elementor sometimes changes features between versions, such as switching how layouts are built or how assets load, and those changes can alter pages that relied on the old behaviour.
Open Elementor, then Settings, and review the features tab. New versions may turn some features on by default or move experimental features to stable.
Read the changelog for the version you updated to. It lists features that changed, were removed or became active by default.
If a feature change broke your layout, test switching it back on a staging site first. Some features cannot be turned off once they are fully released.
Our explainer on Elementor performance settings covers options that affect how CSS and scripts load.
Is an add-on or plugin conflicting with the new version?
Third-party Elementor add-ons often need their own updates after a major Elementor release, and an outdated add-on can break the editor or Pro features.
Update all Elementor add-on packs. Then test for conflicts:
- Use a staging site if possible.
- Deactivate all plugins except Elementor and Elementor Pro.
- Test the editor and front end.
- Reactivate plugins one at a time until the problem returns.
The Health Check and Troubleshooting plugin can disable plugins just for your session on a live site.
Your theme matters too. Switch to Elementor's Hello theme or a default theme briefly to rule it out.
If the editor itself will not open, our guide on fixing the Elementor editor not loading covers editor-specific causes.
Why did the Theme Builder header or footer disappear?
Missing Theme Builder templates after an update usually mean display conditions were lost, the template is unpublished, or old cached CSS is hiding it.
Go to Templates, then Theme Builder. Open the header or footer and check its display conditions. Re-save them even if they look correct.
Make sure the template is published, not a draft. Then regenerate CSS and clear caches again.
If you use a theme that is not fully compatible with Theme Builder, the template may not appear in the right place. Testing with the Hello theme helps confirm this.
Our guide on editing the header in Elementor shows where these settings live.
Is a PHP error or memory limit causing the problem?
If you see a white screen or critical error, check the PHP error log, confirm your PHP version meets Elementor's requirements, and raise the memory limit if it is low.
Turn on WordPress debugging to see the exact message. Our guide on how to enable debug mode explains how.
The WordPress debugging documentation covers the settings in detail. Look for a file path in the error that names Elementor Pro or another plugin.
PHP versions also age out; the PHP supported versions page shows which still get fixes. Elementor needs a reasonable amount of memory, especially in the editor. Our guide on increasing the PHP memory limit shows the options.
How do you roll back Elementor Pro?
Elementor includes a version control tool under Elementor, then Tools, which lets you roll back Elementor and Elementor Pro to an earlier version while you wait for a fix.
Rollback is a temporary measure. Use it if an update broke a live site and other fixes did not help.
Steps:
- Take a backup.
- Open Elementor, then Tools, then the version control tab.
- Choose the previous version for Elementor Pro, and for Elementor if needed.
- Confirm the rollback, then regenerate CSS and clear caches.
Keep the two plugins on versions that work together. Rolling back only one can create a new mismatch.
Our general guide on how to roll back a plugin update covers other methods.
How do you avoid problems with future Elementor Pro updates?
Test updates on a staging site, update Elementor, Elementor Pro and add-ons together, keep backups, and read the changelog for major versions before updating.
A simple routine:
- Take a backup before updating.
- Update on staging first for major releases.
- Update Elementor and Pro at the same time.
- Regenerate CSS and clear caches after updating.
- Check key pages, headers, footers and forms.
Our guide on setting up a staging site helps if you do not have one yet.
When should you contact Elementor support?
Contact Elementor support when you have matched versions, regenerated files, checked the licence, ruled out conflicts and still see the problem.
Pro users get support through their Elementor account. Include your Elementor and Pro versions, PHP version, active plugins, and the exact error or screenshot.
The system info report under Elementor, then System Info, gives support most of the details they need in one place. Copy it into your ticket.
Frequently asked questions
Why did my Elementor Pro widgets disappear after updating?
The most common reason is a version mismatch between Elementor and Elementor Pro. Update both plugins so they are compatible, then regenerate CSS files and clear caches. Also check that your Pro licence is still connected and active.
How do I regenerate CSS in Elementor?
Go to Elementor, then Tools in your dashboard and use the regenerate files and data option. Then clear your caching plugin, host cache, CDN and browser cache so visitors get the new files.
Can I roll back Elementor Pro to an older version?
Yes. Elementor includes a version control tab under Elementor, then Tools, where you can roll back Elementor and Elementor Pro. Take a backup first and keep both plugins on versions that work together.
Does an expired Elementor Pro licence stop the plugin working?
An expired licence stops updates and support, and depending on Elementor's current terms it may limit some Pro features. Check the licence screen in your dashboard and renew or reconnect it from your Elementor account.
Should I update Elementor and Elementor Pro at the same time?
Yes, in most cases. Updating them together avoids version mismatches. For major releases, test the update on a staging site first and update any third-party Elementor add-ons at the same time.
Sources
- Elementor Pro update errors Elementor Help Center
- My changes do not appear online Elementor Help Center
- Elementor Website Builder WordPress.org
- Debugging in WordPress WordPress Developer Resources
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
Related guides
About the editors
Researched from the primary sources listed above and checked against our editorial rules before publishing.


