Plugins Plugin hub Backup SEO Caching Security Forms WooCommerce Images Best backup plugins
Hosting Hosting directory Shared Managed Cloud India
Themes & builders Compare Rank Math vs Yoast
Tools All tools Hosting finder Plugin stack builder Cost calculator Salt generator Theme detector Who is hosting this? Speed test Headline analyzer robots.txt generator Redirect generator Uptime calculator Blog name generator
Best lists Best backup plugins Deals
Guides All guides Speed up WordPress Choose hosting Back up WordPress
How we test

Statistics · Info

WordPress Minimum Requirements (Current)

Short answer

As of November 2026, WordPress.org recommends PHP 8.3 or greater, MariaDB 10.11 or greater or MySQL 8.4 or greater, and HTTPS support. Apache or Nginx is the recommended web server. Older PHP 7.4 and MySQL 5.5.5 setups can still run WordPress, but those versions are past end of life and carry a security risk.

Key takeaways

  • WordPress.org recommends PHP 8.3 or greater, MariaDB 10.11 or greater or MySQL 8.4 or greater, and HTTPS support as of November 2026.
  • The absolute floor is lower: WordPress 7.1 still requires only PHP 7.4 or later, but that floor is not a safe target.
  • Apache 2.4 and nginx 1.30 are the web server versions listed in the WordPress Hosting Handbook.
  • PHP 8.2 reaches end of life on 31 December 2026, so a host still on 8.2 needs a plan to move.
  • Check Tools, then Site Health, then Info in your dashboard to see the PHP and database versions your site uses.
  • WordPress lists no memory size in megabytes on its requirements page, so treat any host memory claim as a hosting setting, not an official minimum.

What are the WordPress minimum requirements right now?

As of November 2026, WordPress.org recommends PHP 8.3 or greater, MariaDB 10.11 or greater or MySQL 8.4 or greater, and HTTPS support.

That short list is the whole recommended set on the WordPress.org Requirements page. It also names Apache or Nginx as the recommended web server.

The word recommended matters here. WordPress can start on older software, but the recommended versions are the ones that still get security fixes. Use them as your pass mark when you pick or check a host.

RequirementRecommended as of November 2026Source
PHP8.3 or greaterWordPress.org
DatabaseMariaDB 10.11 or greater, or MySQL 8.4 or greaterWordPress.org
HTTPSSupportedWordPress.org
Web serverApache or NginxWordPress.org

What PHP version does WordPress need?

WordPress.org recommends PHP 8.3 or greater as of November 2026.

That is the version to ask your host for. The Make WordPress Hosting Handbook goes further and says PHP 8.4 or later is recommended for production environments.

The absolute floor is lower. The same handbook says WordPress 7.1 requires PHP 7.4 or later, unchanged from WordPress 7.0. WordPress 7.0 raised that floor from PHP 7.2.24 to 7.4.

PHP is the language WordPress code is written in, and it runs on the server. A newer PHP version gets security fixes, while an old one does not.

  • PHP 8.2 reaches end of life on 31 December 2026, according to the Hosting Handbook.
  • PHP 8.3 moved to security-only support on 31 December 2025, according to the same handbook.
  • PHP.net lists security support for PHP 8.3 until 31 December 2027.
  • PHP.net lists security support for PHP 8.4 until 31 December 2028.

If your host still runs PHP 7.4, ask when it will move you to a supported version. WordPress.org warns that PHP 7.4 and MySQL 5.5.5 setups have reached end of life and may expose a site to security vulnerabilities. For help with the change, see how to update PHP for WordPress.

What database version does WordPress need?

WordPress.org recommends MariaDB 10.11 or greater, or MySQL 8.4 or greater, as of November 2026.

You need one database system, not both. MariaDB is a fork of MySQL, and WordPress works with either one. The MariaDB site and the MySQL site publish the version details for each system.

The older floor is much lower. The Developer WordPress Before You Install page lists MySQL 5.7 or MariaDB 10.3 or greater. That page is a starting checklist, not the current recommended list.

Long-term support dates show why the newer versions matter. The Make WordPress Hosting Handbook lists MySQL 8.4 LTS until April 2032 and MySQL 9.7 LTS until April 2034.

WordPress stores posts, pages, users, settings, and comments in the database. The install guide says you create a database plus a MySQL or MariaDB user who has all privileges for accessing and modifying it. See MySQL vs MariaDB for WordPress if you need to pick between the two.

Do you need HTTPS to run WordPress?

Yes, WordPress.org lists HTTPS support as a requirement as of November 2026.

HTTPS is the encrypted form of HTTP. It protects logins and form data between a browser and the server. A host that cannot offer HTTPS does not meet the current list.

Most hosts now include an SSL certificate with a plan. Ask your host whether HTTPS is already active on your domain before you install WordPress.

If HTTPS is missing, do not work around it by installing over plain HTTP and fixing it later. Set it up first, then install. That order avoids mixed-content warnings and login problems after launch.

Which web server should you use for WordPress?

Apache or Nginx is the recommended choice, and the Hosting Handbook lists Apache 2.4 and nginx 1.30 as the current versions.

The Make WordPress Hosting Handbook lists Apache HTTPD 2.4 and nginx 1.30 as stable, with nginx 1.31 as mainline. Those versions were checked at the WordPress 7.1 release.

WordPress.org adds that any server that supports PHP and MySQL will do. Apache and Nginx are simply the most tested choices, so they are the safe default.

A web server is the software that receives a browser request and returns the page. Your host runs it for you on shared hosting, so you rarely pick the version yourself. On a VPS or dedicated server, pick a version that still gets fixes.

How much memory does WordPress need?

WordPress.org lists no memory size in megabytes on its requirements page, so there is no official minimum memory figure to quote.

That gap surprises many new site owners. Hosting pages often quote a memory number, but that number is a hosting setting, not a WordPress.org requirement.

WordPress does have two memory settings in wp-config.php. The Developer WordPress wp-config page says WP_MEMORY_LIMIT lets you set the maximum amount of memory PHP can use. It also says WP_MAX_MEMORY_LIMIT can raise memory in the administration area.

The same page links that setting to the error message “Allowed memory size of xxxxxx bytes exhausted”. If you see that error, memory is one place to look, but the server PHP limit still sets the ceiling.

For the wider picture on RAM, read how much RAM WordPress needs. That guide covers what a larger site uses in practice, while this page stays with the official minimum list.

What else do you need before you install WordPress?

You need a domain, a hosting account that meets the list above, a database, and access to the server.

The Developer WordPress Before You Install page lists a login account to the server via FTP or shell, a text editor, FTP, and a web browser. Those tools let you upload files and edit the main config file.

The install itself is short. The Developer WordPress install guide says installing WordPress takes less than 5 minutes in most cases.

Before you start, gather these items:

  • Your hosting login and control panel access
  • A database name, username, and password, or a way to create them
  • Your domain name and its DNS settings
  • An email address for the admin account

If your host offers a one-click install, it creates the database for you. If you install by hand, create the database first, then run the installer in your browser.

How do you check if your host meets the requirements?

Open Tools, then Site Health, then Info in your WordPress dashboard to see the PHP and database versions your site uses.

Site Health is the built-in check in WordPress. Its Server section lists the versions your install runs on, so you can compare them with the recommended list in seconds.

If you have not installed WordPress yet, ask your host directly. WordPress.org even gives a short message you can send, asking for PHP 8.3 or greater, MariaDB 10.11 or greater or MySQL 8.4 or greater, Nginx or Apache with the mod_rewrite module, and HTTPS support.

Check the WordPress hosting requirements guide as well if you want the hosting view of the same list. It covers what a host should offer beyond the bare minimum.

What mistakes should you avoid?

Do not treat the old floor as a safe target, and do not install on software that no longer gets security fixes.

That is the most common error. A host that says WordPress “works” on PHP 7.4 is telling the truth about the floor, not about safety. The recommended list is the standard to use.

Avoid these errors too:

  • Picking a host that cannot confirm its PHP, MariaDB or MySQL, and HTTPS versions in writing
  • Installing over plain HTTP and planning to add HTTPS later
  • Raising WP_MEMORY_LIMIT in wp-config.php without checking the server PHP limit first
  • Assuming a database user with limited rights will work for the install

If your host fails any item on the recommended list, ask for an upgrade date. If it cannot give one, move to a host that meets the list before you build the site.

Frequently asked questions

Can WordPress run on PHP 7.4?

Yes, WordPress 7.1 still requires only PHP 7.4 or later, so it can run on 7.4. That is not a safe choice, though. PHP 7.4 has reached end of life and no longer gets security fixes, and WordPress.org recommends PHP 8.3 or greater as of November 2026.

Do I need MySQL or MariaDB for WordPress?

You need one of them, not both. WordPress.org recommends MariaDB 10.11 or greater or MySQL 8.4 or greater as of November 2026. Most hosts offer one by default, so pick the one your host supports and check that its version meets the recommended list.

Is HTTPS required for WordPress?

Yes. WordPress.org lists HTTPS support as part of its requirements as of November 2026. HTTPS encrypts logins and form data between a browser and the server. Set it up before you install, because adding it later can cause mixed-content warnings and login problems.

What is the minimum memory for WordPress?

WordPress.org lists no memory size in megabytes on its requirements page, so there is no official minimum figure. WordPress uses WP_MEMORY_LIMIT for front-end requests and WP_MAX_MEMORY_LIMIT in the admin area, but the server PHP limit sets the ceiling. Check Site Health to see the limit your site actually has.

How do I check my PHP and database versions?

In your WordPress dashboard, open Tools, then Site Health, then Info, and expand the Server section. It lists the PHP version, the database version, and the server software. Compare those numbers with the recommended list: PHP 8.3 or greater and MariaDB 10.11 or MySQL 8.4 or greater.

Sources

  1. Requirements WordPress.org
  2. Server Environment Make WordPress Hosting
  3. Before You Install Developer WordPress
  4. Supported Versions PHP.net
  5. How to install WordPress Developer WordPress

Is your product missing, or something out of date?

Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.

About the editors

WPLegible editors

Researched from the primary sources listed above and checked against our editorial rules. About the site · How we test