Plugins Plugin hub Backup SEO Caching Security Forms WooCommerce Images Best backup plugins
Hosting Hosting directory Shared Managed Cloud India
Themes & builders Compare Rank Math vs Yoast
Tools All tools Hosting finder Plugin stack builder Cost calculator Salt generator Theme detector Who is hosting this? Speed test Headline analyzer robots.txt generator Redirect generator Uptime calculator Blog name generator
Best lists Best backup plugins Deals
Guides All guides Speed up WordPress Choose hosting Back up WordPress
How we test

Hosting · Explainer

What Is a Control Panel Like RunCloud or SpinUpWP?

Short answer

A control panel like RunCloud or SpinUpWP is a web dashboard that turns a rented VPS into a working WordPress server. You connect the panel to your server, and it installs the web server, PHP, database, and caching software, then lets you manage sites, SSL, backups, and staging from a browser. The panel is not hosting: you still rent and pay for the VPS apart from the panel.

Key takeaways

  • RunCloud and SpinUpWP are dashboards that manage a VPS you rent from another provider.
  • RunCloud starts at $9 per month for 1 server as of November 2026, and SpinUpWP starts at $12 per month for 1 server.
  • SpinUpWP works only with WordPress, while RunCloud also manages other PHP apps such as Laravel.
  • WordPress.org recommends PHP 8.3 or newer and MariaDB 10.11 or newer, or MySQL 8.4 or newer.
  • A panel does not replace your own backups, and it does not update your plugins and themes for you.

What is a control panel like RunCloud or SpinUpWP?

A server control panel like RunCloud or SpinUpWP is a web dashboard that sets up and manages a VPS for WordPress without command-line work for each task.

You rent a VPS from a cloud provider such as DigitalOcean, Vultr, Linode, or Hetzner, then you connect it to the panel. The panel installs the software WordPress needs and gives you buttons for jobs you would otherwise do over SSH.

That is the whole idea: the server stays yours, and the panel is the steering wheel.

RunCloud describes itself as a cloud-based server management panel for PHP apps, and SpinUpWP describes itself as a cloud-based server control panel built for WordPress. Both charge for the panel only, so the VPS bill stays apart. If you want a side-by-side view of panel types, read cPanel vs custom hosting panels.

How does a VPS control panel work?

You connect the panel to a rented VPS, and the panel installs the web server, PHP, database, and caching software for you.

The panel talks to your server over SSH and runs an install script with root access. RunCloud sets up an Nginx and PHP-FPM stack, according to RunCloud's own guide to cPanel alternatives.

SpinUpWP installs the latest stable versions of Nginx, PHP, MySQL, and Redis from public apt repos, according to SpinUpWP's Hetzner page.

After setup, the panel keeps a link to the server and sends it commands when you click a button. Common jobs it handles include:

  • Creating a new WordPress site and its database
  • Issuing and renewing a free SSL certificate
  • Switching the PHP version for one site
  • Setting up page caching and Redis object caching
  • Creating a staging copy of a site
  • Scheduling backups to your own cloud storage

The panel itself runs on the vendor's own systems, not on your VPS. If the panel has an outage, your sites keep running, but you cannot change server settings through the panel until it returns.

What does RunCloud do for WordPress?

RunCloud is a general PHP panel that installs WordPress, manages PHP versions, SSL, staging, and Git deploys from one dashboard.

RunCloud works with WordPress, Laravel, and other PHP apps, so it is not WordPress-only. Its pricing page lists one-click WordPress installs, multiple PHP versions, Git deployment, and RunCache, its WordPress caching system.

The same page lists staging sites on every plan: 1 on Essentials, 10 on Professional, and unlimited on Business and Enterprise, as of November 2026.

The WordPress Toolkit, with Canvas and Magic Login, sits on the Business plan only, according to the RunCloud pricing page. Lower plans still run WordPress like any other PHP app, with SSL, caching, and staging included. Business also adds 30 GB of free backup storage, according to the same page.

RunCloud suits you if you run WordPress next to other PHP apps on the same server. If every site you run is WordPress, a WordPress-only panel may feel simpler, since it hides the settings you never use.

What does SpinUpWP do for WordPress?

SpinUpWP is a WordPress-only panel that provisions Nginx, PHP, MySQL, and Redis on your own VPS and adds WordPress caching, backups, and staging.

When you add a site, SpinUpWP configures a free SSL certificate, cron jobs, caching rules, and WP-CLI, according to SpinUpWP's Hetzner page.

All sites get Redis object caching to cut database requests, and you can switch on full-page caching with one checkbox, according to the same page. That cache serves pages without running PHP at all.

Backups go to your own cloud storage. You pick from five cloud storage providers, set the bucket and the retention period, and SpinUpWP sends the backups there, according to SpinUpWP's Hetzner page. You can back up the database only, the files only, or the full site.

Staging is a full copy of a site, with its files, database, and server settings, according to the same page. WP-CLI is ready on the command line from the first login, so developers can run WordPress commands without installing anything extra. If you manage many client sites, read how to manage multiple WordPress sites.

How much do RunCloud and SpinUpWP cost?

As of November 2026, RunCloud starts at $9 per month for 1 server, and SpinUpWP starts at $12 per month for 1 server, with the VPS billed apart in both cases.

The panel fee never includes the server. A small VPS often costs about the same as the panel itself, so add both bills before you judge the total. The RunCloud pricing page and the SpinUpWP pricing page both list monthly prices, and both offer a free trial.

Panel and planPrice as of November 2026ServersWordPress extras
RunCloud Essentials$9 per month11 staging site, unlimited sites
RunCloud Professional$19 per month5010 staging sites, site cloning
RunCloud Business$49 per month100WordPress Toolkit, unlimited staging, 30 GB backup storage
RunCloud Enterprise$399 per month500Unlimited staging
SpinUpWP Essentials$12 per month11 daily backup per site, 1 user, unlimited sites
SpinUpWP Advanced$19 per month1Up to 4 daily backups per site, extra users at $2 per month each

Yearly billing cuts the RunCloud price: Essentials is $90 per year, Professional is $190 per year, and Business is $490 per year, according to a check of the RunCloud pricing page dated 5 November 2026.

SpinUpWP cuts the per-server price as you add servers, down to $1 per month per server at 61 or more servers, according to the SpinUpWP pricing page.

SpinUpWP also sells a migration service, and its pricing page states what it will not do for you: customize server settings, set up scaling, or improve site speed. Those jobs stay with you or with a developer you hire. For the full hosting budget, read how much WordPress hosting costs.

How do you set one up on a VPS?

You rent a fresh Ubuntu VPS, connect it from the panel dashboard, and run the install command the panel gives you.

RunCloud needs a fresh 64-bit Ubuntu LTS install, such as 22.04 or 24.04, with at least 1 processor core, more than 2 GB of disk space, and a public IPv4 address, according to the RunCloud getting started guide.

NAT VPS setups are not supported. For RAM, the same guide suggests 1 GB for simple blogs and 2 GB or more for production sites.

The setup flow looks like this:

  1. Rent a fresh VPS from your provider of choice.
  2. Open the panel dashboard and click “Connect a New Server”.
  3. Pick your provider, or choose the manual install by IP address.
  4. Paste the install command the panel shows into your server over SSH.
  5. Wait for the panel to install Nginx, PHP, MySQL, and the other parts.
  6. Create your first WordPress site from the panel and point your domain at the server.

Your firewall must allow TCP traffic on ports 22, 80, 443, and 34210 for the RunCloud agent, according to RunCloud's provisioning guide. Start with a fresh server: the panel will not install on a VPS that already runs another web server or control panel.

If you are still picking a host, read how to choose WordPress hosting.

How do you check the PHP and database versions on your server?

You check versions in WordPress under Tools → Site Health → Info, where the Server and Database sections list the PHP and database versions.

WordPress.org recommends PHP 8.3 or greater, MariaDB 10.11 or greater, or MySQL 8.4 or greater, with HTTPS support, according to the WordPress.org Requirements page. The same page says Apache or Nginx is recommended.

WordPress still runs on PHP 7.4 and MySQL 5.5.5, but those versions have reached end of life and may expose your site to security problems.

The PHP version matters because each branch gets fixes for a set time only. The php.net supported versions page lists PHP 8.4 in active support until 31 December 2026, with security fixes until 31 December 2028. It lists PHP 8.5 in active support until 31 December 2027, with security fixes until 31 December 2029.

A good panel lets you switch PHP per site, so you can put one site on PHP 8.4 while another stays on 8.3 until its plugins catch up. Check the version in Site Health after each switch.

PHP 8.3 gets security fixes only until 31 December 2027, and PHP 8.2 gets security fixes only until 31 December 2026.

When is a VPS panel the wrong choice?

A VPS panel is the wrong choice when you want the host to handle updates, security fixes, and support for you.

A panel gives you control, and control brings jobs. SpinUpWP states that non-security server updates are your job, and that themes and plugins are not updated by the panel. RunCloud does not provide server status updates, so you check with your cloud provider when a server is down.

A panel is also a poor fit for one small site with low traffic. Shared hosting or managed WordPress hosting costs less in time and money for a single blog, and it includes support.

A VPS panel pays off when you run several sites, need a set PHP version, or want staging and Git deploys on your own server.

If that list sounds like work you do not want, managed hosting fits better. Read is managed WordPress hosting worth it before you decide.

Three myths come up often. First, a panel is not a host: cancelling the panel does not cancel your server, and SpinUpWP notes that you would then manage servers over SSH or through your VPS provider.

Second, a panel is not a backup plan by itself: it schedules site backups, but you still need the whole server covered. Third, a panel is not a speed fix: it sets up caching, but slow plugins and large images still slow a site down.

What mistakes should you avoid?

Do not install a panel on a server that already runs sites or another control panel.

Start with a fresh VPS, keep the panel fee and the server bill apart in your budget, and set up backups before you move a live site.

A panel makes server work faster, but it does not remove the need for a backup you have already restored once. Read how to back up WordPress and keep a copy off the server.

Other common mistakes include:

  • Picking the cheapest VPS with 1 GB of RAM for a busy production site
  • Running PHP 8.2 or older after its security support ends on 31 December 2026
  • Skipping staging and editing the live site directly
  • Letting the panel's free trial end without a backup plan in place
  • Assuming the panel updates plugins, themes, or WordPress core for you

Frequently asked questions

Is RunCloud or SpinUpWP a web host?

No. Both are control panels that manage a server you rent from another provider, such as DigitalOcean or Hetzner. You pay the panel fee and the server bill apart. If you cancel the panel, your server and your sites stay with your VPS provider, and you manage them over SSH or through that provider.

Can I run WordPress on RunCloud if I am not a developer?

Yes, you can install WordPress from the RunCloud dashboard without writing code, and the panel handles PHP, SSL, and caching settings for you. You still need to know the basics of domains and DNS, and you stay responsible for plugin updates, backups, and server updates that the panel does not cover.

Does SpinUpWP work with hosts other than DigitalOcean?

Yes. SpinUpWP works with DigitalOcean, Linode, Vultr, Hetzner, Amazon EC2 and Lightsail, Google Cloud, and any other provider that gives you a VPS you can reach over SSH. You connect your own provider account, and the server bill comes from that provider, not from SpinUpWP.

Do I still need a backup plugin if I use a VPS panel?

Yes, in most cases. Panels schedule site backups to your own cloud storage, but a backup plugin or a separate backup routine gives you a second copy and a restore path you control. Keep at least one copy off the server, and restore it once on a staging site so you know the backup works.

What happens to my sites if I stop paying for the panel?

Your sites keep running on your VPS, because the panel does not host them. You lose the dashboard, so you manage the server over SSH or through your VPS provider instead. Keep your server login details and your backups safe before you cancel, so you are not locked out of your own server.

Sources

  1. Requirements WordPress.org
  2. Supported Versions PHP
  3. Pricing RunCloud
  4. Pricing SpinUpWP
  5. Getting Started RunCloud Docs
  6. Your Own Hetzner Cloud Server SpinUpWP
  7. 8 Best cPanel Alternatives in 2026 RunCloud

Is your product missing, or something out of date?

Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.

About the editors

WPLegible editors

Researched from the primary sources listed above and checked against our editorial rules. About the site · How we test