Plugins Plugin hub Backup SEO Caching Security Forms WooCommerce Images Best backup plugins
Hosting Hosting directory Shared Managed Cloud India
Themes & builders Compare Rank Math vs Yoast
Tools All tools Hosting finder Plugin stack builder Cost calculator Salt generator Theme detector Who is hosting this? Speed test Headline analyzer robots.txt generator Redirect generator Uptime calculator Blog name generator
Best lists Best backup plugins Deals
Guides All guides Speed up WordPress Choose hosting Back up WordPress
How we test

Blogging & content · Guide

How to Write and Publish a Blog Post in WordPress

How to Write and Publish a Blog Post in WordPress

Short answer

To write a blog post in WordPress, go to Posts → Add Post, type a title that names the question readers ask, and build the body with blocks for headings, text, images, and lists. Set a category, tags, a featured image, and an excerpt in the Post tab, preview the post on phone and desktop, then click Publish twice. To publish later, pick a future date and the button changes to Schedule.

Key takeaways

  • The block editor is the default editor since WordPress 5.0, launched in December 2018.
  • Posts are dated blog entries, while pages hold static content such as a contact page.
  • Set one category, 3 to 5 tags, a featured image, and an excerpt before publishing.
  • Preview on phone and desktop, since the editor view hides layout faults.
  • Click Publish twice to go live, or pick a future date to schedule the post.

How do you start a new blog post in WordPress?

Start a new post from Posts → Add Post in your WordPress dashboard.

Log in to your dashboard, click Posts in the left menu, then click Add Post. The block editor opens with the cursor in the title area. Type your title there, then click below it and start writing.

WordPress.org states that you can also launch the block editor from Posts → Add New or Pages → Add New (checked November 2026).

Both routes open the same editor, so use the one you reach fastest. The editor opens in fullscreen mode by default, which hides the dashboard menu while you write.

A post differs from a page in one clear way. Learn WordPress states that posts are for dynamic content, such as blog posts and news, while pages are for static content, such as a contact page (checked November 2026).

Pick Posts for anything dated that belongs in your blog feed.

Make WordPress Support states that posts are what make a blog a blog, and that they are listed in reverse chronological order on the blog front page (checked November 2026).

What is the block editor and how does it work?

The block editor builds a post from blocks, where each paragraph, heading, image, or list is its own block.

WordPress.org states that the block editor became the default editor in WordPress 5.0 in December 2018 and replaced the classic editor (checked November 2026).

To use the classic editor today, you must install the classic editor plugin. Most sites now use the block editor, so learn its layout first.

The editor workspace has three main parts, as WordPress.org states: the top toolbar, the sidebar with post and block settings, and the content area (checked November 2026).

The top toolbar holds the save, preview, and publish controls. The sidebar holds the settings for the post you are writing.

To add a block, click the + button at the top left or type / on a new line, then type the block name, such as /image or /heading. Press Enter to place it.

Each block has its own small toolbar when you click it, with options to move it, change its style, or delete it.

How do you write the title and the first lines?

Write a title that names the exact question or problem the reader wants solved.

A good title reads like a search query, such as “How to Back Up a WordPress Site”. Keep it under 60 characters when you can, so it fits in search results and browser tabs. Put the key words near the start of the title.

Write the first paragraph as a direct answer to the title. Tell the reader what the post will help them do and how long it takes, in 2 to 3 short sentences. Readers decide in seconds whether to stay, so the first lines must give them a reason.

Use headings to break the post into steps. Each heading should ask a question the reader has, such as “How do you restore a backup?” That shape helps readers scan the post and helps search tools find the answer they need.

How do you add images, video, and other media?

Add media with the Image block, the Video block, or the Gallery block from the block inserter.

Click the + button, search for Image, and choose Upload or Media Library. Pick a file from your computer or one you already uploaded. Add alt text that states what the image shows, since alt text helps readers who use screen readers and helps search tools grasp the image.

Keep image files small before you upload them. Resize a photo to the width your theme shows, often 1200 pixels or less, and save it in a web format. A guide on how to optimize images for WordPress walks through sizing and formats in more depth.

Place images near the step they show. A screenshot of a settings screen belongs right after the step that names that screen. Add a caption under the image when the reader needs to know what to look at in it.

How do you set categories, tags, and the post URL?

Set categories, tags, and the post URL in the Settings sidebar before you publish.

Open the Settings sidebar on the right and make sure the Post tab is active. Under Categories, tick one main category that fits the post, and add a new one only when no current category fits.

Under Tags, type a few exact words that describe the post, such as “backup” or “restore”.

Learn WordPress states that categories group similar posts together, like the table of contents for a blog, while tags are more exact words that describe a post in more depth (checked November 2026).

Use 1 or 2 categories and 3 to 5 tags per post. More tags do not help readers find the post.

The post URL, called the permalink or slug, sits in the same sidebar. Keep it short and use the key words from the title, such as “back-up-wordpress-site”.

A guide on how to set up permalinks in WordPress covers the site-wide shape of URLs.

A guide on the best permalink structure for SEO covers which shape to pick.

Add a featured image and an excerpt in the Post tab of the Settings sidebar.

Click “Set featured image” near the top of the Post tab, then upload an image or pick one from the Media Library.

The featured image shows at the top of the post and in post lists, so pick one that matches the topic at a glance. Many themes crop it, so check how it looks on the live post after you publish.

Write an excerpt of 1 to 2 sentences that sums up the post. The excerpt shows in post lists and in search results on some themes. Write it as a plain summary, not as a repeat of the title.

If you leave the excerpt blank, WordPress builds one from the start of the post. That auto version often cuts off mid-sentence, so writing your own takes a minute and reads better. Fill in the author and publish date in the same sidebar while you are there.

How do you preview, publish, or schedule a post?

Preview the post first, then click Publish twice, or pick a future date to schedule it.

Click View at the top of the editor and choose Preview to see the post as readers will see it. Check the headings, images, and links on a phone screen as well as on a desktop screen.

Fix any text that runs past the edge or any image that looks stretched.

When the post is ready, click Publish at the top right. WordPress shows a check panel with the visibility, date, and URL. Click Publish again to make the post live.

WordPress.com Support states the same two-click flow: click Publish, check the pre-publish panel, then click Publish again (checked November 2026). WordPress.org states that saving a draft stores the post without publishing it, and the Save label changes to Saved once the save works (checked November 2026).

To schedule the post, open the Post tab, click the publish date, and pick a future date and time. The top button then changes from Publish to Schedule. Click it, and WordPress will publish the post at that time without you being online.

How do you check the post after it goes live?

Check the live post in a private browser window, as a visitor would see it.

Open the post URL from the front of the site, not from the editor. Read the title, the first lines, and each heading. Click every link in the post and confirm each one opens the right page.

Check the featured image, the excerpt in the post list, and the category and tag links at the bottom.

WordPress.org states that the Outline tab in the Document Overview shows the character and word count, the estimated time to read, and the number of paragraphs and blocks in the post (checked November 2026).

Use that count before you publish to check the post length. A guide on how many words a blog post should be for SEO gives a sense of what length fits each kind of post.

If you spot an error after publishing, fix it in the editor and click Update. The change goes live at once. If the old version still shows, clear your cache or wait a few minutes for the cached copy to clear.

What mistakes should you avoid?

Avoid publishing without a preview, because the editor view hides layout faults.

Text that looks fine in the editor can run long on a phone, and an image can sit in the wrong place. Preview on both screen sizes before you click Publish. That check takes 2 minutes and saves a fix after the post is live.

Avoid writing the whole post as one long block of text. Readers scan before they read, so break the post into short paragraphs, headings, and lists. A guide on posts vs pages in WordPress helps when you are unsure which content type fits the piece you are writing.

Avoid stuffing the post with tags and categories. One main category and a few exact tags help readers find related posts, while 15 tags only add noise. Avoid changing the post URL after it goes live, since old links to it will break.

Editor areaWhere to find itWhat to set before publishing
TitleTop of the content areaClear question or problem, under 60 characters
Blocks+ button or / commandHeadings, lists, images in order
Post settingsSettings sidebar, Post tabCategory, tags, featured image, excerpt
Publish panelPublish button, top rightVisibility, date, URL check
PreviewView button, top toolbarPhone and desktop layout check
SchedulePost tab, publish dateFuture date and time
Note: save a draft often while you write, since WordPress stores the draft in the dashboard and you can return to it later.

Frequently asked questions

Do I need a plugin to write a blog post?

No. The block editor is built into WordPress and is the default editor since WordPress 5.0, so you can write and publish a post with no extra plugin. Plugins add extra blocks or tools, such as SEO checks or forms, but the core job of writing, adding images, and publishing works out of the box. Install the classic editor plugin only if you want the old editor back.

What is the difference between a post and a page?

Posts are dated entries for your blog, listed in reverse chronological order, with categories and tags. Pages are static content, such as an About page or a contact page, with no date order and no categories or tags. Use a post for news, guides, and anything that belongs in the blog feed. Use a page for content that rarely changes and stands alone.

How long should a blog post be?

It depends on the job of the post. A short news post can run 300 to 500 words, while a how-to guide often needs 1,200 to 2,000 words to cover each step. The post should be as long as the answer needs and no longer. Short paragraphs, headings, and lists help readers scan a long post. Check the Outline tab in the editor to see the word count before you publish.

Can I edit a post after it is published?

Yes. Open the post from Posts → All Posts, make your change in the editor, and click Update. The change goes live at once. If the old version still shows, clear your cache or wait a few minutes for the cached copy to clear. Avoid changing the post URL after it goes live, since links to the old URL will break. Fixing a typo or an out-of-date fact is safe.

Why does my post look different after publishing?

The editor shows a clean writing view, while the live site uses your theme, so spacing, image sizes, and fonts can look different. Preview the post before you publish, and check it on a phone as well as a desktop screen. If text runs past the edge or an image looks stretched, adjust the block settings. A caching plugin can also show an old copy after you update.

Sources

  1. WordPress Block Editor WordPress.org
  2. How to Create a Post or Page with the WordPress Block Editor Learn WordPress
  3. Understanding the difference between WordPress posts and pages Learn WordPress
  4. Posts Make WordPress Support
  5. WordPress Posts WordPress.com Support

Is your product missing, or something out of date?

Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.

About the editors

WPLegible editors

Researched from the primary sources listed above and checked against our editorial rules. About the site · How we test