Setup & site building · Guide
How to Schedule Posts in WordPress

Short answer
To schedule a post in WordPress, open it in the block editor, click Immediately next to Publish in the Summary panel, pick a future date and time, then click Schedule twice. WordPress publishes it automatically at that time, using the time zone in Settings, General and WP-Cron, which runs on page visits.
Key takeaways
- Click Immediately next to Publish, pick a future date and time, then click Schedule twice.
- The publish button changes to Schedule as soon as a future date is picked.
- Scheduled posts use the time zone set in Settings, General.
- WP-Cron only runs on page loads, so a quiet site can publish posts late.
- A post saved only as a draft never publishes on a schedule.
- A server cron job that calls wp-cron.php is the reliable fix for missed schedules.
How do you schedule a post in the block editor?
Open the post, click “Immediately” next to “Publish” in the Summary panel, pick a future date and time, then click “Schedule” twice.
Scheduling is built into WordPress core, so you need no plugin. The button at the top of the editor changes from “Publish” to “Schedule” as soon as you pick a future date, which is the clearest sign the post is queued and not live yet.
- Open the post in the editor, or create a new one with “Posts → Add New”.
- In the settings sidebar, find the “Summary” panel.
- Click “Immediately” next to “Publish”. A calendar opens.
- Pick the date, then set the hour and minute and choose AM or PM.
- Click outside the calendar to close it.
- Click the blue “Schedule” button at the top of the editor.
- Check the date and time on the confirmation screen, then click “Schedule” again.
WordPress publishes the post at that time on its own. In older WordPress versions the same panel was called “Status & Visibility” under the “Document” tab, and the flow was the same. The official guide on the Page/Post Settings sidebar shows the “Scheduled” status and the date picker in detail.
How do you schedule a post in the classic editor?
In the “Publish” box, click “Edit” next to “Publish immediately”, enter a future date and time, click “OK”, then click “Schedule”.
The classic editor has no calendar pop-up, so you type the date and time by hand. Make WordPress Support explains the steps: "In the Publish metabox to the right of the post editor, click the blue Edit link next to Publish immediately.
Set the future date/time when you want the post to publish itself and click OK."
- Open the post in the classic editor.
- Find the “Publish” box on the right.
- Click “Edit” next to “Publish immediately”.
- Enter the month, day, year, hour and minute.
- Use the 24-hour clock for afternoon times: 1:00 PM is 13:00.
- Click “OK”, then click “Schedule”.
The time is based on your location settings in “Settings → General”. If the time zone there is wrong, the post will publish at the wrong local time, so check it before you schedule anything important.
| Editor | Date picker | Clock | Confirm step |
|---|---|---|---|
| Block editor | Calendar pop-up | AM or PM | Click “Schedule” twice |
| Classic editor | Type the date by hand | 24-hour clock | Click “OK”, then “Schedule” |
How do you schedule a page?
Schedule a page the same way as a post: open it, set a future date in the Summary panel, and click “Schedule”.
Pages and posts share the same date control. The WordPress.org documentation lists “Scheduled: Publish automatically on a chosen date” as one of the statuses for both pages and posts.
The steps are the same in the block editor and the classic editor, and the page will show “Scheduled” next to its title in “Pages → All Pages” until it goes live.
This is useful for landing pages, sale pages and announcements that must appear at an exact time. Write the page, set the date, and click “Schedule” twice, just as you would for a post.
If the page must go live with a post at the same time, schedule both for the same minute and check both after the time passes.
How do you change or cancel a scheduled post?
Open the post, click the date next to “Publish”, set a new date, and click “Schedule” again, or set the date to now and click “Publish” to go live at once.
To see every queued post, go to “Posts → All Posts” and click the “Scheduled” filter above the list. From there you can open any scheduled post and change it.
- To move a post: open it, click the scheduled date in the Summary panel, pick a new date and time, then click “Schedule”.
- To publish early: open the post, set the date to today and the current time, then click “Publish”.
- To cancel the schedule: open the post, click “Switch to draft” in the editor, and the post returns to draft status.
Make WordPress Support gives the same advice for publishing early: edit the date to today and the current time, click “OK”, then click “Publish”. A scheduled post that you only save as a draft will not publish, so always click “Schedule” to confirm the queue.
How do you backdate a post?
Pick a past date in the same date picker, then click “Publish” instead of “Schedule”.
Backdating is useful when you import older articles and want each one to keep its original publish date. Make WordPress Support says: "To backdate a post, simply edit the date before you click Publish, as described above. In this case, the button will not change to Schedule."
The post then appears in the blog list at the date you chose, not at today's date.
- Open the post and click the date next to “Publish”.
- Pick the past date and time you want.
- Click “Publish”.
The post goes live at once with the older date. Do not backdate a post to game search results: the date should match when the content was actually written or first published elsewhere.
Why did a scheduled post miss its time?
WordPress uses WP-Cron, which only runs when someone loads a page, so a post can miss its time on a quiet or heavily cached site.
This is the most common scheduling problem in WordPress. The WordPress Plugin Handbook explains: "WP-Cron does not run constantly as the system cron does; it is only triggered on page load."
It gives this example: if a task is scheduled for 2:00 PM and no page loads happen until 5:00 PM, the task runs at 5:00 PM.
A post due at 2:00 AM on a site with no visitors until morning will publish in the morning, not at 2:00 AM.
The post is not lost. It keeps the “Scheduled” status and the date you set, and it publishes on the next page load after its time.
Make WordPress Support says scheduled posts "will be triggered by the first visit to your blog on or after the exact date/time you set", and suggests logging out and viewing the front page to trigger it.
The 4 usual causes are:
- No visits: nobody loaded a page after the scheduled time.
- Full-page caching: a cached page is served without WordPress running, so WP-Cron never checks.
- WP-Cron switched off:
DISABLE_WP_CRONis set inwp-config.phpwith no server cron to replace it. - Loopback blocked: the site cannot send a request to its own
wp-cron.php, so the task never starts.
How do you fix a missed schedule?
Publish the missed post by hand now, then replace WP-Cron with a real server cron job for reliable timing.
First, recover the post. Go to “Posts → All Posts”, click the “Scheduled” filter, open the post and click “Publish”. The post goes live at once with its scheduled date.
If several posts missed their time, publish each one the same way. The full fix is covered in the guide on how to fix scheduled posts missed schedule.
Then fix the cause so it does not happen again:
- Check the time zone in “Settings → General” and set your city, not a fixed UTC offset.
- Open “Tools → Site Health → Status” and look for loopback and scheduled event warnings.
- Ask your host whether the site can reach its own
wp-cron.php, or check withwp cron testif you have WP-CLI. - For the reliable fix, add
define( 'DISABLE_WP_CRON', true );towp-config.phpand set up a server cron job that callswp-cron.phpevery 5 to 15 minutes.
A server cron job runs on the server clock, not on page visits, so posts publish on time even at 2:00 AM on a quiet site. The steps are in the guide on how to disable wp-cron and use a real cron job.
The WP-Cron basics are in how to run WordPress cron from the server.
How do you check a scheduled post will publish on time?
Confirm the time zone, the “Scheduled” status, and that the site gets visits or runs a server cron job.
Run these 4 checks before an important launch:
- “Settings → General” shows your city as the time zone, and the current time shown there is right.
- The post shows “Scheduled” in “Posts → All Posts” with the right date and time.
- “Tools → Site Health → Status” shows no errors about scheduled events or loopback requests.
- The site has traffic after the scheduled time, or a server cron job calls
wp-cron.phpon a schedule.
For a high-stakes launch, schedule a test post for 5 minutes ahead and watch it publish. If the test post is late, fix WP-Cron before the real launch. A content plan helps here too: see how to create a content calendar for a WordPress blog to plan publish times in advance.
What mistakes should you avoid?
Do not save a post as a draft and expect it to publish, and do not trust WP-Cron on a quiet site.
The 5 mistakes below cause most scheduling failures:
- Clicking “Save Draft” instead of “Schedule”, so the post never queues.
- Setting the wrong time zone in “Settings → General”, so the post publishes hours early or late.
- Using the 12-hour clock in the classic editor for an afternoon time instead of the 24-hour clock.
- Scheduling a post for the middle of the night on a low-traffic site with no server cron job.
- Editing a scheduled post after its time has passed without checking whether it already published.
After each scheduled post goes live, open it in a private window and confirm it shows at the right time. That one check catches a broken schedule before your readers do.
Frequently asked questions
Will a scheduled post publish if I close my browser?
No, as long as you click Schedule and not Save Draft. A post saved only as a draft never queues. To check, go to Posts, All Posts and click the Scheduled filter. The post should show Scheduled with the date and time you picked.
Why does my scheduled post say Missed schedule?
It is not lost. WordPress uses WP-Cron, which only runs when someone loads a page, so a post on a quiet or heavily cached site can publish late. Open the post and click Publish to put it live now, then set up a real server cron job so future posts publish on time.
Can I schedule a page, not just a post?
Yes. Pages use the same date control as posts, in the Summary panel for the block editor and the Publish box for the classic editor. Pick a future date and click Schedule. The page shows Scheduled in Pages, All Pages until it goes live.
How do I change the date of a scheduled post?
Open the post, click the scheduled date in the Summary panel, and pick a new date and time, then click Schedule. To publish early, set the date to today and the current time and click Publish. To cancel, use Switch to draft in the editor.
How do I backdate a WordPress post?
Pick a past date in the date picker and click Publish. The button does not change to Schedule for a past date. The post goes live at once with the older date, which is useful when importing older articles so each one keeps its original publish date.
Sources
- Schedule a Post Make WordPress Support
- Page/Post Settings sidebar WordPress.org
- Scheduling posts and pages Learn WordPress
- Cron WordPress Developer Resources
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
Related guides
About the editors
Researched from the primary sources listed above and checked against our editorial rules before publishing.


