Product facts · Guide
How to Migrate a WordPress Site to Pressable
Short answer
To migrate a WordPress site to Pressable, ask Pressable's support team to move it free, or install the Pressable Automated Migration plugin on your old site and run it yourself. The plugin copies the site to a Pressable staging environment, where you preview it before changing DNS. Once the copy checks out, point your domain at Pressable with nameservers or A records.
Key takeaways
- Pressable's team migration is free on every plan, with no stated limit on the number of sites.
- The Pressable Automated Migration plugin moves the site to a staging environment for preview before DNS changes.
- Disconnect both sites from Jetpack before running the plugin.
- Point the domain with four nameservers or four A records, then add it in MyPressable.
- SSL is provisioned automatically once the domain is added; use Retry SSL if it is missing.
- Titan Email is a paid add-on; mailbox hosting is not included in a Pressable plan.
What is the fastest way to migrate a WordPress site to Pressable?
The fastest way is to ask Pressable's team to move it, since the free white-glove migration runs while your old site stays live.
Pressable's migration page states the free service is ready 24/7, and it covers one site or 100 sites at no extra cost (checked November 2026). The team handles database transfers, DNS configuration, SSL setup, and post-migration testing, according to Pressable's managed hosting page.
If you prefer to move the site yourself, the Pressable Automated Migration plugin does the job in one click, and it is free on WordPress.org. A manual move with SSH and phpMyAdmin is also possible, though Pressable gives no step-by-step guide for it.
| Route | Cost | Best for |
|---|---|---|
| Pressable team migration | Free | Most sites, the team does the work |
| Automated Migration plugin | Free | Moving the site yourself |
| Manual SSH and phpMyAdmin | Free | Advanced users who want full control |
What do you need before you start?
You need an active Pressable account, a destination site already set up on Pressable, and access to your current site.
Make a full backup of the old site and keep a copy on your own computer before you start. Learn WordPress gives the same advice in its migration lesson, and a backup is your way back if the move stalls.
Disconnect both the current site and the Pressable destination site from Jetpack before you run the plugin. Pressable's plugin guide lists this as a required step, and skipping it can block the move.
Gather your current host login details and your domain registrar login before you begin. The white-glove team needs access to your old host, and you will need the registrar login to change DNS later.
If you have not picked a plan yet, see how much Pressable costs first.
How do you ask Pressable's team to migrate your site?
Contact Pressable's support team and tell them you want the team to migrate your site, then give them access to your old host.
- Get in touch with Pressable support and say you would like the team to migrate your site.
- Share your site details and the login details for your old host.
- The team moves the site and sends you an email with the next steps.
- Quality-check the copy, then update your DNS to go live.
Every plan includes free migrations, either through the automated plugin or with the team handling the move, and support is available 24/7/365 through live chat and email, according to Pressable's migration blog post.
There is no stated limit on the number of sites. Pressable says the service is free whether you move one site or 100 (checked November 2026), as stated on its free migrations page.
Do not change DNS until you have checked the copy. The preview step is what keeps visitors from seeing a half-moved site.
How do you migrate yourself with the Pressable Automated Migration plugin?
Install the Pressable Automated Migration plugin on the old site, enter the destination details from your Pressable dashboard, and click Migrate.
- In the My.Pressable.com Dashboard, open the settings page for the destination site, click the three-dot menu in the top-right corner, then click Migrate Here.
- Copy the SFTP user and password shown there. Reset the password first if you cannot copy it.
- On the old site, go to Plugins, then Add New, search for “Pressable Automated Migration”, click Install Now, then Activate.
- Enter an email address for progress notifications, accept the Terms, and click Migrate.
- Enter the Destination Site URL, usually the staging URL of the Pressable site. The SFTP Address is sftp.pressable.com.
- Click Migrate and wait for the completion email.
The plugin moves the site to a Pressable staging environment, so you can preview it before you change DNS. It handles all database adjustments automatically, according to the plugin page on WordPress.org.
BlogVault powers the transfer and shows live progress during the move. The plugin page notes that the time a migration takes varies with the size of the site, so large sites take longer.
Files over 1 GB and cache, backup, and log files may be skipped, so check the Files Not Migrated section after the move. Manually upload any essential missing file over SFTP or SSH.
You can run the plugin one last time to sync changes made on the live site since the first migration. Pressable recommends a content freeze during the move, so no new posts or orders are missed.
After a successful move, reset the migration user password in the dashboard. Choose the site, open the Actions menu, then Migrate Here, then Reset.
How do you test the migrated site before going live?
Open the staging URL of the Pressable site and check every page, form, and login before you touch DNS.
Pressable's own advice is to follow one order: migrate, preview, verify, then change DNS. Checking first means visitors never see a half-moved site, as Pressable's migration blog post explains.
- Click through your main pages and check that images load.
- Submit a contact form and confirm it sends.
- Log in to wp-admin on the copy and open the dashboard.
- Check menus, widgets, and any custom post types.
Clear the site cache before you review the copy, and clear static CSS files if your theme builds them, as Divi does. If you use Yoast, reset Yoast indexables after you add the domain, according to Pressable's plugin guide.
For a store, put it in maintenance mode before migration and keep it there until DNS has fully spread. Orders placed on the old site after the move exist only there, so sync them before the cutover.
See whether Pressable includes backups to confirm what protection the copy has after the move.
How do you point your domain to Pressable?
Point your domain at Pressable only after the copy passes your checks, using nameservers or A records at your registrar.
Pressable's domain guide describes a two-step setup: point the domain at your registrar, then add the domain in the my.pressable.com control panel. A Domain Setup Wizard is also available, as explained in the domain guide.
The easy nameserver method uses four nameservers: ns1.openhostingservice.com, ns2.openhostingservice.com, ns3.openhostingservice.com, and ns4.openhostingservice.com.
For the A record method, find the site IPs in MyPressable under Domains, then IP Addresses. Add four A records in total: two for the root domain and two for www, using both IPs in a round-robin setup.
In MyPressable, open the site, go to Domains, then Add Domain, and enter the non-www domain. Pressable adds the www version automatically, and the star button marks the primary domain.
DNS can take up to 72 hours to spread, though in most cases it takes less than an hour. Our guide to how long DNS propagation takes explains the wait in more detail.
If your domain already has email hosting, use the A record method, or contact Pressable before changing nameservers. Changing nameservers without care can interrupt mail delivery.
What happens to SSL and email after the move?
Pressable provisions SSL automatically once the domain is added, and the domain, DNS, and SSL icons turn green when it is done.
If you added the domain long before pointing DNS, the certificate may not have been issued. In that case, open Domains, click Actions next to the domain, and choose Retry SSL, as the domain guide explains.
You can check SSL details from the same Actions menu, under SSL Info. Clear your browser cache before you test, and try a different browser or network if the result looks stale.
Mailbox hosting is not part of a Pressable plan by default. Titan Email is a paid add-on with a 90-day trial, and it includes a tool to import existing mail from any IMAP system.
WordPress itself still sends mail through Pressable's built-in email server by default. Sites that send more than 200 emails per hour should use a third-party host with an SMTP plugin instead, according to Pressable's email guide.
Our guide to setting up email with WordPress hosting covers the options for mail after a move.
What mistakes should you avoid?
The most common mistakes are skipping the preview step and changing DNS before the copy is checked.
- Migrating without disconnecting Jetpack first.
- Changing DNS before testing the staging copy.
- Editing the live site during the move instead of freezing content.
- Forgetting to check the Files Not Migrated list for files over 1 GB.
- Changing nameservers when the domain also handles email.
- Cancelling the old host before DNS has spread.
Keep the old host active until the new site has served traffic for a day or two. Our guide to changing hosting without losing SEO covers the wider checklist for a safe switch.
If the plugin fails, check the migration details first, then disable the Cloudflare proxy or pause your security plugin and try again. Pressable's guide names those three as the common causes of a failed run.
Frequently asked questions
Is Pressable migration free?
Yes. Pressable's team migration is free on every plan, and the Pressable Automated Migration plugin is free on WordPress.org. Pressable says the service is free whether you move one site or 100, and support is available 24/7/365 through live chat and email.
How long does a Pressable migration take?
Pressable gives no fixed time for a migration, since it varies with the size of your site. The plugin shows live progress and sends an email when it finishes. DNS changes can take up to 72 hours to spread, though in most cases they take less than an hour.
Do I need to disconnect Jetpack before migrating to Pressable?
Yes. Pressable's plugin guide lists disconnecting both the current site and the Pressable destination site from Jetpack as a required step before you run the migration. Skipping it can block the move, so do it before you install the plugin on the old site.
What files does the Pressable migration plugin skip?
The plugin may skip default themes and their children, cache directories, temporary and backup directories, backup files such as .sql, .zip, and .tar, log files, version-control folders, and files over 1 GB. Check the Files Not Migrated section after the move and upload any essential missing file by SFTP or SSH.
Does Pressable move my email?
No. Mailbox hosting is not part of a Pressable plan by default. Titan Email is a paid add-on with a 90-day trial and a tool to import mail from any IMAP system. If your domain already has email hosting, use the A record method for DNS, or contact Pressable before changing nameservers.
Can I migrate a WooCommerce store to Pressable?
Yes, but plan for orders placed during the move. Pressable advises putting the store in maintenance mode before migration until DNS has fully spread, or migrating live and then syncing orders and customers before the DNS cutover. Orders placed on the old site after the move exist only there.
Sources
- Free Managed WordPress Migrations Pressable
- Using the Pressable Automated Migration Plugin Pressable
- Pressable Automated Migration WordPress.org
- Assigning a Domain to Pressable Pressable
- What Actually Happens When You Migrate a WordPress Site Pressable
- Migrating Your Site Part 1: Changing to a New Host and Domain Learn WordPress
- WordPress Hosting with Email Pressable
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
