Plugins Plugin hub Backup SEO Caching Security Forms WooCommerce Images Best backup plugins
Hosting Hosting directory Shared hosting Managed WordPress Cloud hosting VPS hosting By reader location Hosting finder
Themes & builders Compare Rank Math vs Yoast
Tools All tools Hosting finder Plugin stack builder Cost calculator Salt generator Theme detector Who is hosting this? Speed test Headline analyzer robots.txt generator Redirect generator Uptime calculator Blog name generator
Blog Best backup plugins Deals
Guides All guides Speed up WordPress Choose hosting Back up WordPress
How we test

Setup & site building · Guide

How to Install WordPress (Every Method Compared)

How to Install WordPress (Every Method Compared)

Short answer

The fastest way to install WordPress is your host's one-click installer: pick WordPress in the hosting panel, fill in the site details, and the host sets up the files and database. If your host has no installer, install it by hand in about five minutes, or with WP-CLI in seconds. All three routes end with the same WordPress site.

Key takeaways

  • The one-click installer is the fastest route and needs no file uploads.
  • WordPress needs PHP 8.3 or newer, plus MySQL 8.4 or MariaDB 10.11 or newer.
  • The manual install takes under five minutes once the files and database are ready.
  • WP-CLI installs WordPress in seconds with four commands.
  • All three methods end with the same WordPress site, files, database, and admin account.

What is the fastest way to install WordPress?

Use your host's one-click installer: pick WordPress in your hosting panel, fill in the site details, and the host sets up the files and database for you.

Most hosts offer a one-click tool for WordPress, and WordPress.org's install guide notes that many web hosts now offer tools to install WordPress for you. The whole job takes a few minutes and needs no file uploads.

If your host has no installer, you can install WordPress by hand in about five minutes, or with WP-CLI in seconds. Both routes are compared below.

What do you need before you install WordPress?

You need a domain name, a hosting plan, and a host that meets the WordPress requirements.

WordPress.org's Requirements page recommends PHP 8.3 or greater, plus MariaDB 10.11 or greater, or MySQL 8.4 or greater, with HTTPS support. The guide to WordPress hosting requirements explains each item in plain words.

The same page notes that WordPress also runs on PHP 7.4 or newer and MySQL 5.5.5 or newer. Those older versions have reached their official end of life, so they can leave a site open to security flaws.

PHP 8.2 loses security support on December 31, 2026, as the PHP supported versions page shows. That makes 8.3 or newer the safe pick.

You also need an email address you can reach. WordPress sends the admin login details and password reset links to it, so use an address you check often.

How does the one-click installer work?

Open your hosting panel, find the WordPress installer, pick your domain, set the admin username and password, and click Install.

The exact names differ by host: Softaculous, Installatron, and the host's own installer all do the same job. The steps below match most of them.

Follow these steps:

  1. Log in to your hosting panel.
  2. Find the WordPress installer under Websites, Applications, or Software.
  3. Pick the domain where WordPress should live.
  4. Set the site title, admin username, admin password, and admin email.
  5. Click Install and wait for the success message.

The installer creates the database, writes the config file, and sets up the admin account for you. When it finishes, log in at yourdomain.com/wp-admin/ with the details you set.

The guide to choosing WordPress hosting covers what to look for in a host if you have not picked one yet.

How do you install WordPress by hand?

Download the WordPress package, create a database, upload the files to your server, and run the install script in your browser.

WordPress.org's install guide calls this the famous 5-minute install. Under most conditions it takes less than five minutes once the files and database are ready.

The steps in short are: download and unzip the package from wordpress.org/download/, then create a database and a MySQL user with full rights to it.

Next, upload the files to your web root or a subfolder, then open your domain in a browser to run the setup. The install script asks for the database details, then the site title, admin username, password, and email.

The full step-by-step version is a separate guide on installing WordPress by hand. It covers the database setup in phpMyAdmin, the wp-config.php file, and the common errors.

How do you install WordPress with WP-CLI?

Run four commands on your server: wp core download, wp config create, wp db create, then wp core install with your site details.

WP-CLI is the command line tool for WordPress. The wp core install docs state that it performs the famous 5-minute install in seconds or less.

A full install looks like this:

wp core download
wp config create --dbname=example_db --dbuser=example_user --dbpass=example_pass
wp db create
wp core install --url=example.com --title=Example --admin_user=admin [email protected]

This route needs SSH access to your server and a host that allows command line tools. It suits developers and anyone who sets up many sites, since the same four commands work each time.

The full step-by-step version is a separate guide on installing WordPress with WP-CLI. It covers installing WP-CLI itself, the config options, and the checks to run after.

Which install method should you pick?

Pick the one-click installer if you want the easiest route, the manual install if you want full control, and WP-CLI if you work on the command line.

MethodBest forTimeSkills needed
One-click installerFirst site, no setup fussA few minutesNone
Manual installFull control over files and databaseAbout 5 minutesFTP and database basics
WP-CLI installRepeat installs, servers, scriptsSecondsSSH and command line

The one-click installer hides the database and config steps, which is fine for a first site. The manual install shows you each piece, which helps when something breaks later.

WP-CLI is the fastest once it is set up, but it needs SSH access. Shared hosts often block SSH, so check with your host first if you plan to use it.

All three methods end with the same WordPress site. The files, the database, and the admin account work the same way no matter which route you took.

How do you finish the setup after the install?

Log in to the dashboard, set the site title and tagline, pick a theme, and turn on HTTPS.

First, check that your site loads over HTTPS. The guide to installing an SSL certificate on WordPress walks through the steps if your host has not set it up yet.

Next, pick a theme and set up the pages you need. A theme changes how the site looks, and it does not touch the WordPress files you just installed.

Then set the admin email and time zone under Settings, then General. WordPress uses the admin email for password resets and update notices.

Last, make a backup. The guide to backing up WordPress without a plugin shows how to copy the files and database by hand.

How much does it cost to install WordPress?

The WordPress software is free; you pay only for hosting and the domain name.

WordPress is open source software, so the download costs nothing. The download page lists no price, and the install itself needs no paid tool.

Hosting is the main cost. The guide to how much WordPress hosting costs breaks down shared, VPS, and managed plans. A domain name is a small yearly cost on top.

The one-click installer and the manual install both use the same free download. WP-CLI is free too, and it ships as a single file you download from the WP-CLI project.

How do you check the install worked?

Open your domain in a browser, log in at yourdomain.com/wp-admin/, and confirm the dashboard loads with no errors.

The install script ends with a login prompt when it works. If you see the WordPress login screen, the files and database are linked up right.

Check the site front page too. The default theme and the “Hello world!” post should show. If the front page shows a directory list instead, the server is not set to load index.php by default, as WordPress.org's install guide notes.

If the browser shows an error about the database, the database details in wp-config.php are wrong or the database user lacks rights. The guide to fixing the database connection error covers the checks in order.

What mistakes should you avoid?

Do not use “admin” as the username, do not skip the backup, and do not install WordPress on a host that misses the PHP and MySQL versions it needs.

Other mistakes to avoid:

  • Using a weak admin password, or one you reuse from another site.
  • Installing WordPress in the wrong folder, such as a subfolder when you wanted the site at the domain root.
  • Leaving the “discourage search engines” box checked after launch, which hides the site from Google.
  • Skipping the database backup before you change hosts or themes.
  • Installing on PHP 7.4 or MySQL 5.5.5, which have reached end of life and can leave the site open to security flaws.

The current release as of November 2026 is WordPress 7.1.5, released on November 18, 2026, according to WordPress.org's versions page. Install the latest release so you start with the newest fixes.

Frequently asked questions

Does it cost money to install WordPress?

The WordPress software is free. You pay only for hosting and the domain name. The one-click installer, the manual install, and WP-CLI all use the same free download from wordpress.org.

Which install method should a beginner pick?

The one-click installer if you want the easiest route, the manual install if you want full control of the files and database, and WP-CLI if you work on the command line and set up many sites.

Can I install WordPress in a subfolder instead of the domain root?

Yes. You can install WordPress in a subfolder such as example.com/blog/ by uploading the files there and running the install script at that address. You can also move a site later, though the site address then needs an update.

What should I do if the install shows a database error?

Check the database details in wp-config.php first, then the database user rights, then whether the database server is running. The database error guide on this site covers the checks in order.

Does WordPress run on older PHP and MySQL versions?

Yes. WordPress also runs on PHP 7.4 or newer and MySQL 5.5.5 or newer, but those versions have reached their official end of life. They can leave a site open to security flaws, so use PHP 8.3 or newer instead.

Sources

  1. Requirements WordPress.org
  2. How to install WordPress WordPress Developer Resources
  3. Download WordPress WordPress.org
  4. WordPress Versions WordPress.org
  5. PHP: Supported Versions PHP
  6. Installing WP-CLI Make WordPress CLI

Is your product missing, or something out of date?

Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.

About the editors

Written and checked byWPLegible Editorial Team Independent WordPress reviews and guides

Researched from the primary sources listed above and checked against our editorial rules before publishing.