Plugins Plugin hub Backup SEO Caching Security Forms WooCommerce Images Best backup plugins
Hosting Hosting directory Shared Managed Cloud India
Themes & builders Compare Rank Math vs Yoast
Tools All tools Hosting finder Plugin stack builder Cost calculator Salt generator Theme detector Who is hosting this? Speed test Headline analyzer robots.txt generator Redirect generator Uptime calculator Blog name generator
Best lists Best backup plugins Deals
Guides All guides Speed up WordPress Choose hosting Back up WordPress
How we test

Troubleshooting · Troubleshooting

How to Fix a Failed UpdraftPlus Backup

Short answer

A failed UpdraftPlus backup usually means WP-Cron never fired, a PHP memory or time limit cut the job short, the disk ran out of space, or the cloud login expired. Open the backup log to find the exact step that stopped, fix that cause, and lower the archive split to 100 MB if the site is large. Then run a manual backup and confirm the files reach your remote storage.

Key takeaways

  • Most failed UpdraftPlus backups trace to WP-Cron, PHP limits, disk space, or an expired cloud login.
  • UpdraftPlus splits archives into 400 MB chunks by default, and lowering the split to 100 MB helps large sites finish.
  • Read the backup log first, because it names the exact step where the job stopped.
  • Google Drive gives personal accounts 15 GB of free storage, so check the account quota before blaming the plugin.
  • A backup counts as fixed only when a manual run completes and the files appear in remote storage.

What does a failed UpdraftPlus backup mean?

A failed UpdraftPlus backup is a backup job that stops before all files and the database reach their destination.

You see a red failure notice on the Backup/Restore tab, a progress bar that never moves, or no new backup in the Existing Backups list.

UpdraftPlus runs in three stages: it zips your files, dumps the database, then uploads both to storage. A failure in any stage stops the whole job, so the first task is to find which stage broke.

UpdraftPlus is installed on more than 4 million sites, and WordPress.org's plugin page lists a 4.8 out of 5 rating from 8,736 reviews (checked November 2026). At that scale, most failures come from server limits or settings, not from the plugin itself.

Why do UpdraftPlus backups fail most often?

Most UpdraftPlus backup failures come from four causes: a scheduler that never fires, a PHP limit that cuts the job short, too little disk space, or a cloud login that expired.

SymptomLikely causeFirst fix
Scheduled backup never runsWP-Cron never firesCheck DISABLE_WP_CRON and site traffic
Progress bar freezes while zippingMemory or time limitLower the archive split to 100 MB
Failure after the upload startsCloud login or quotaRe-authenticate the storage account
Log shows disk fullNot enough free spaceFree space or reduce the split size
Failure right after an updateOutdated plugin versionUpdate UpdraftPlus to the latest release

The free version can run backups every 2, 4, 8 or 12 hours, daily, weekly, monthly or fortnightly, WordPress.org's plugin page states. A schedule that stops without warning usually points at the scheduler, not at the schedule itself.

How do you read the UpdraftPlus backup log?

Open the Backup/Restore tab, find the failed backup, and click the log link to see the exact step where the job stopped.

Follow these steps to read it:

  1. Go to Settings, then UpdraftPlus Backups, then the Backup/Restore tab.
  2. Click “Download most recently modified log file” under the failed backup.
  3. Search the log for “error”, “failed”, or “fatal”, and note the last completed step.
  4. Check the time stamps to see how far the job got before it stopped.

TeamUpdraft's guide to stalled backups explains that log lines starting with (0) mean the job is waiting to resume. Leave it for 10 minutes before you check, since resumptions start a few minutes later.

If the UpdraftPlus log is too short to explain the failure, turn on WordPress debug logging. Developer.WordPress.org's debugging guide shows how WP_DEBUG_LOG writes errors to wp-content/debug.log. Turn it off again after you find the cause.

Why does a scheduled backup never start?

A scheduled backup never starts when WordPress's scheduler, WP-Cron, never fires, and WP-Cron only runs when someone loads a page on your site.

The Plugin Handbook explains that WP-Cron checks for due tasks on every page load and does not run on its own. A low-traffic site, or one behind full-page caching, may go hours without a page load that triggers it.

These are the most common reasons the scheduler stays silent:

  • Maintenance mode is on, which stops scheduled tasks of all kinds.
  • DISABLE_WP_CRON is set to true in wp-config.php.
  • Loopback connections are blocked by the host.
  • The whole site sits behind HTTP password protection.

TeamUpdraft's guide to stalled backups advises removing the DISABLE_WP_CRON line, or setting it to false, and then asking the host for a real system cron job if the problem stays.

If Site Health reports a loopback problem, see our guide to fixing the loopback request failed error.

Why does a backup stop halfway through zipping?

A backup that stops while zipping usually hits a PHP memory limit, a PHP execution time limit, or a disk space limit before the zip file is done.

PHP's default memory_limit is 128M, php.net's manual states. Large uploads folders can need more than that while they are compressed, so the process dies without a clear message in the dashboard.

If the log shows an out-of-memory error, see our guide to fixing the allowed memory size exhausted error.

If the job dies after a fixed number of seconds, the time limit is the likely cause. See our guide to fixing the maximum execution time exceeded error.

UpdraftPlus splits backup archives into chunks of 400 MB by default, TeamUpdraft's backup limits page states. Lowering that split to 100 MB in Settings, then Expert settings, gives each chunk a better chance of finishing inside the server's time limit.

Disk space can also stop a backup mid-zip. TeamUpdraft's disk space guide warns that a backup can need up to two-thirds of your used space free, because PHP builds a temporary zip as large as the final file.

A missing PHP extension can slow zipping to a crawl. A WordPress.org support thread shows a backup stalling on the plugins zip because the ZipArchive extension was off, so UpdraftPlus fell back to the slower PclZip engine. Ask your host to enable the ZipArchive extension.

Why does the upload to Google Drive or Dropbox fail?

An upload fails when the cloud login has expired, the account is out of space, or the plugin's saved credentials no longer match the account.

Google Drive gives personal accounts 15 GB of free storage, TeamUpdraft's Google Drive guide states. A backup larger than the free space left in the account fails at the upload step, so check the account's storage first.

The same guide advises re-authenticating Google Drive from the UpdraftPlus settings page when the connection breaks. TeamUpdraft's Google Drive app guide adds that you should clear the saved Google Drive settings first if the account was already connected, then follow the authorisation prompt again.

TeamUpdraft's October 2026 security incident page says version 1.26.13 revoked UpdraftCentral connection keys, so sites that used UpdraftCentral should also re-authorise remote storage after updating. The page is at teamupdraft.com.

If you set up remote storage from scratch, see our guide to setting up UpdraftPlus remote storage.

How do you run a backup that completes?

Fix the cause first, then run a manual backup with a smaller archive split and watch the log until every component uploads.

  1. Update UpdraftPlus to the latest version. The current free release is 1.26.16, dated 16 November 2026, TeamUpdraft's changelog states.
  2. Open the log of the failed backup and note the last completed step.
  3. Check free disk space in your hosting panel and free space if the site uses most of its allowance.
  4. In Settings, then Expert settings, lower “Split archives every” from 400 MB to 100 MB.
  5. Re-authenticate your remote storage account if the log points at an upload error.
  6. Click “Backup Now” and keep the settings page open while it runs, since that helps the job resume if it pauses.
  7. Confirm the new backup appears under Existing Backups and the files exist in your cloud storage.

How do you confirm the fix worked?

A fix worked when a manual backup completes, the backup set lists every component, and the files appear in your remote storage account.

Check the log for a completion line and no error lines after it. Then open your Google Drive or Dropbox account and confirm the zip files are there with recent time stamps.

The strongest check is a restore on a staging copy. See our guide to restoring a backup with UpdraftPlus for the steps. A backup proves itself only when a restore works.

When should you call your host?

Call your host when the log points at a server limit you cannot change, or when loopback and cron problems stay after you fix the settings.

Ask your host about these:

  • PHP memory or execution time limits you cannot raise yourself.
  • The ZipArchive extension is missing and you cannot enable it.
  • Loopback connections are blocked on the server.
  • Disk space is full and you cannot free or buy more.
  • Backups fail on a fresh install with default settings.

WordPress recommends PHP 8.3 or newer, WordPress.org's requirements page states. If your host still runs PHP 7.4, ask for an upgrade, since old PHP versions can also slow or break backups.

What mistakes should you avoid?

Avoid these mistakes while you fix a failed backup:

  • Deleting your only backup before the fix is confirmed.
  • Turning on WP_DEBUG on a live site and leaving it on.
  • Raising limits in wp-config.php without checking the host's real caps.
  • Ignoring the log and retrying the same failing backup.
  • Storing your only backup copy on the same server as the site.
  • Updating the plugin in the middle of a stuck backup instead of after it.

Frequently asked questions

Why does UpdraftPlus say my backup failed but the log looks empty?

The job may have died before it wrote anything useful, or it may still be waiting to resume. Log lines starting with (0) mean resumption is pending, so wait 10 minutes and check again. If the log stays empty, turn on WP_DEBUG_LOG to capture the PHP error in wp-content/debug.log, then turn it off.

How long should an UpdraftPlus backup take?

There is no fixed time, because it depends on the size of your files and database and on your server speed. A small site often finishes in minutes, while a large media library takes much longer. If the progress bar shows no change for a long time, open the log to see where the job stopped.

Can I back up to Google Drive with the free version of UpdraftPlus?

Yes. The free version includes Google Drive, Dropbox, Amazon S3, FTP and email as storage destinations. A personal Google account gives you 15 GB of free storage, which covers several backups of a small site. Larger sites may need a paid storage plan or a smaller archive split.

Does UpdraftPlus back up my whole WordPress site?

The free version backs up your files and database, but it does not back up WordPress core by default. That is fine in most cases, because you can download a fresh copy of WordPress core from wordpress.org. If you need core files included, the paid More files add-on covers them.

What should I do if the backup fails right after I update UpdraftPlus?

Update to the newest release first, since a later version may already fix the problem. The current free release is 1.26.16, dated 16 November 2026. Then read the backup log, re-authenticate your remote storage if the log points at an upload error, and run a manual backup.

Is it safe to delete old backups to free disk space?

Yes, as long as you keep at least one complete, recent backup set somewhere off the server. Delete the oldest sets first and keep the newest one until a fresh manual backup completes. Never delete the only copy of a backup before you have a working replacement.

Sources

  1. What to do if a backup stops mid-way TeamUpdraft Documentation
  2. Are there any backup limits? TeamUpdraft Documentation
  3. Free disk space needed to create a backup TeamUpdraft Documentation
  4. UpdraftPlus Changelog TeamUpdraft
  5. UpdraftPlus: WP Backup & Migration Plugin WordPress.org
  6. Debugging in WordPress Developer.WordPress.org
  7. Cron Developer.WordPress.org
  8. Requirements WordPress.org

Is your product missing, or something out of date?

Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.

About the editors

WPLegible editors

Researched from the primary sources listed above and checked against our editorial rules. About the site · How we test