Troubleshooting
Elementor Not Working on GoDaddy: Causes and How to Fix It

Short answer
Elementor usually breaks on GoDaddy because of low PHP memory, an outdated PHP version, GoDaddy's server cache, a firewall blocking editor requests, or a plugin conflict. Check your server info, raise the memory limit, flush every cache, and test plugins on a staging copy.
Key takeaways
- Compare your PHP version and memory with Elementor's published requirements.
- Raise WP_MEMORY_LIMIT, and ask GoDaddy if the server limit is locked.
- Flush GoDaddy's cache and regenerate Elementor files after edits.
- Firewalls can block Elementor's save and load requests.
- Test plugin conflicts on staging, not the live site.
- Enable the debug log for white screens and critical errors.
Why is Elementor not working on GoDaddy?
Elementor usually fails on GoDaddy because of a low PHP memory limit, an old PHP version, GoDaddy's server cache or CDN, a security firewall blocking editor requests, or a plugin conflict.
None of these problems is unique to GoDaddy. They appear on any host. GoDaddy just has a few specific layers, such as its Managed WordPress cache and optional website security firewall, that are worth checking early.
The usual symptoms are an editor stuck on the loading screen, a grey or blank widget panel, a Preview could not be loaded message, or changes that save but never appear on the live site.
Work through the checks below in order. Each one rules out a common cause before you move to slower fixes such as conflict testing.
Does your GoDaddy plan meet Elementor's requirements?
Check that your plan runs a supported PHP version and gives WordPress enough memory, because Elementor's editor needs both to load.
Elementor publishes its current minimums on the Elementor system requirements page. It lists the WordPress version, PHP version and memory it expects. Requirements change over time, so read the live page rather than an old forum post.
To see what your site actually has, open Tools > Site Health > Info in WordPress. The Server section shows the PHP version and the WordPress Constants section shows the memory limit. Elementor also has its own report under Elementor > System Info.
If the PHP version is old, change it in your GoDaddy hosting dashboard. The option sits in the settings for your Managed WordPress site or in cPanel for shared hosting, depending on your plan.
How do you raise the PHP memory limit on GoDaddy?
Raise WordPress memory by setting WP_MEMORY_LIMIT in wp-config.php, and raise the server's PHP limit in cPanel or ask GoDaddy support if your plan locks it.
Memory exhaustion is the most common reason the Elementor editor stalls. WordPress lets you request more memory with a line in wp-config.php placed above the line that says to stop editing:
define( 'WP_MEMORY_LIMIT', '256M' );
That constant cannot go higher than the server's own PHP setting. The PHP memory_limit directive caps what any script can use.
On cPanel-based shared hosting, you can usually adjust PHP options through the PHP selector or a php.ini file. On Managed WordPress plans, access to these settings is more limited, so contact GoDaddy support if the value will not change.
Our guide on how to access GoDaddy-hosted WordPress shows where to find file access and the dashboard for your plan.
Is GoDaddy's cache serving old pages?
Yes, often: GoDaddy's Managed WordPress cache and CDN can keep showing old versions of pages, so Elementor edits seem to vanish after you save them.
Managed WordPress plans include server-level caching. When you update a page in Elementor, the cached copy may still be served to visitors for a while.
Flush the GoDaddy cache from the WordPress admin bar or the hosting dashboard, depending on what your plan shows. Then clear Elementor's own generated files under Elementor > Tools with the Regenerate Files & Data button, and clear any caching plugin you run.
If you also use Cloudflare or another CDN in front of GoDaddy, purge that too. Our general guide on how to clear cache in WordPress covers each layer.
Check the result in a private browser window. That shows what logged-out visitors see without your browser cache.
Could a firewall be blocking the Elementor editor?
Yes; a web application firewall or security plugin can block the AJAX and REST API requests Elementor uses, which stops the editor from loading or saving.
GoDaddy sells website security products that put a firewall in front of your site. Security plugins such as Wordfence add their own rules. Elementor sends large requests full of layout data, and some firewall rules mistake them for attacks.
Signs of a firewall problem include a 403 error when saving, a save button that spins forever, or errors in the browser console that mention blocked requests.
Temporarily disable the security plugin or check the firewall logs for blocked requests to admin-ajax.php or /wp-json/. If you find them, allowlist those requests rather than leaving protection switched off.
Is a plugin or theme conflict breaking Elementor?
A conflict is likely when the editor fails after an update; deactivate other plugins and switch to a default theme on staging to find the cause.
Optimisation plugins that delay or combine JavaScript are frequent culprits. So are older add-on packs for Elementor that have not been updated for the current version.
The cleanest test is on a staging copy. GoDaddy Managed WordPress plans generally include staging, and you can also use a staging plugin. Deactivate everything except Elementor, then reactivate plugins one at a time until the problem returns.
Elementor's help article on the widget panel not loading describes the same conflict testing approach. If the editor itself never opens, our guide on fixing the Elementor editor not loading goes deeper into each check.
What if you see a white screen or critical error?
A white screen or critical error means PHP has stopped, so turn on WordPress debugging to see the exact plugin, file and line that caused it.
WordPress can log errors to a file when you enable debugging in wp-config.php. The WordPress debugging guide explains the WP_DEBUG and WP_DEBUG_LOG constants.
The log usually names the plugin folder involved. If it points to Elementor or an add-on, update or reinstall that plugin. If it mentions memory, go back to the memory section above.
GoDaddy-specific white screen issues are covered in our guide to the white screen of death on GoDaddy.
For Elementor's own error message, see how to fix the Elementor critical error.
Could mixed content or URL settings stop Elementor loading?
Yes; if WordPress and site addresses use different protocols or domains, the editor can load scripts from the wrong URL and fail silently.
This often happens after adding an SSL certificate on GoDaddy or moving the site from a temporary domain. The editor page loads over HTTPS while some files still point to HTTP, and browsers block them.
Check Settings > General and confirm the WordPress Address and Site Address match exactly, including https and www. Then use Elementor's Replace URL tool under Elementor > Tools if old addresses are stored in your layouts.
Take a backup before replacing URLs. The change touches the database.
Which fix should you try first?
Use the symptom table below to choose a starting point, then work down the list until Elementor loads and saves normally.
| Symptom | Most likely cause | First fix |
|---|---|---|
| Editor stuck on loading screen | Low memory or plugin conflict | Raise memory, then test plugins |
| Grey or blank widget panel | Conflict or blocked scripts | Disable optimisation plugins |
| Changes save but do not show | GoDaddy or CDN cache | Flush GoDaddy cache and regenerate Elementor files |
| 403 or save failing | Firewall rules | Check firewall logs and allowlist requests |
| White screen or critical error | PHP fatal error | Enable debug log |
| Editor fails after SSL change | Mixed content or URL mismatch | Fix site URLs and replace old URLs |
When should you contact GoDaddy or Elementor support?
Contact GoDaddy when the cause is server-side, such as PHP limits or firewall rules, and Elementor when the problem persists on a clean install with no other plugins.
GoDaddy can confirm PHP settings, server errors and firewall blocks that you cannot see from WordPress. Ask them for the PHP error log around the time the editor failed.
Elementor support, or the free Elementor support forum, is the right place when a minimal setup still fails. Include your System Info report, PHP version, memory limit and any console errors.
If none of this fixes it, compare with our broader guide on Elementor not loading, which covers causes that apply to every host.
Frequently asked questions
Does Elementor work on GoDaddy hosting?
Yes. Elementor runs on GoDaddy shared and Managed WordPress plans as long as the plan meets Elementor's PHP version and memory requirements. Most problems come from limits, caching or conflicts rather than from GoDaddy blocking the plugin.
Why are my Elementor changes not showing on my GoDaddy site?
GoDaddy's server cache or a CDN is probably serving an older copy of the page. Flush the GoDaddy cache, regenerate Elementor's files and data, clear any caching plugin, then check the page in a private browser window.
How much memory does Elementor need on GoDaddy?
Elementor lists its recommended memory on its system requirements page, and that figure can change between versions. Many site owners set WordPress memory to 256M. Your hosting plan's PHP limit must allow that value for it to take effect.
Can I change the PHP version on GoDaddy for Elementor?
Usually yes. GoDaddy lets you change PHP version in the hosting dashboard or cPanel, depending on the plan. Back up the site first, then switch and test the Elementor editor along with your other plugins.
Should I move away from GoDaddy if Elementor keeps failing?
Not straight away. Most failures have a fixable cause such as memory, caching or a conflict. If the plan's limits are too low and cannot be raised, upgrading the plan or moving to a host with more resources may then make sense.
Sources
- Elementor System Requirements Elementor
- Elementor widget panel not loading Elementor
- Debugging in WordPress WordPress Developer Resources
- PHP core configuration directives PHP.net
- Elementor support forum WordPress.org
Is your product missing, or something out of date?
Tell us what to add or correct. We read every note and reply when we need a source. A message does not buy a ranking.
Thanks — we review requests within 3 business days.
Related guides
About the editors
Researched from the primary sources listed above and checked against our editorial rules before publishing.


